Discussion Category:  Protein Analyzers

Oxygen leak test failed

FP628 failed oxygen leak check:

Helium leak check passed, all systems check passed; segmental oxygen leak check passed the Combustion and Ballast stage but failed to pressurize at the aliquote doser stage. When PV7 valve was pinched - the system failed - so leak  must be down stream of Ballast output and upstream of PV7 - narrowing it at the aliquote doser section.

The aliquote doser C-flex tubing was replaced with new one, dosing valve was cleaned and o-rings checked, cleaned  and regreased. Oxygen segmental leak check still failed only at the aliquote doser stage. Could the aliquote doser metal section with the loop be blocked rather than leaking? If so how do you unblock it?

avatar placemark

Asked by

DLC6173
Report this Post

Page 1 of 1