Discussion Category: Electron Microscopes
stage is not initialised
We used EVO LS 10. We encountered stage is not initialised. We troubleshooting according your manual. But we found stage is not initialised. Joystick can't move any XYZ. What should we do?
Reply bybeamsys
You can check limit switches, power to the stage controller, and cables. Then call you local Zeiss representative and pay them to repair the microscope.
Valery Ray
www.linkedin.com/in/valeryray
==============================
PBS&T, MEO Engineering Company
290 Broadway, Suite 298
Methuen, MA 01844, USA
Phone: +1-978-305-0479 - leave a message
Mobie: +1-978-305-0479 - leave a message
E-mail: vray@partbeamsystech.com
Web: www.partbeamsystech.com
Web: www.freudlabs.com
Reply byTodd.springer9237
Did you ever get the stage to initialize? Running into same issue.
Thanks,