ESPEC - TSE Small Thermal Shock Chambers

Manufactured by  ESPEC
Follow this Equipment

Simple to install and operate!

Did you think that getting a thermal shock chamber was too expensive, required special utilities, and half your lab-space? The TSE-11 thermal shock chamber is the solution. Only 26 inches wide, the TSE-11 transfers product loads between cold and hot zones with a temperature range of -65°C to 200°C. 
 
  • Meets strict Mil-Std 883 1010.7/1010.8 thermal cycling requirements with 4 kg. (8 lbs.)   
  • Also can be used for IEC 61300-2-47, JEDEC JESD47E, JESD22-A104, and others   
  • Touch-screen operation is very easy, yet full-featured   
  • The cold zone is cooled by refrigeration. No need for tanks of liquid nitrogen (or cooling water supply)   
  • The only utility required is 208V power   
  • Super quiet operation of less than 60dB
  • Active Questions & AnswersAsk a Question

    There are no current Discussions

    Environmental Chambers Service ProvidersView All (20)

    Request Support
    Documents & Manuals

    There are no Documents or Manuals available.

    Features of TSE Small Thermal Shock Chambers

    Chamber Design Features: 

    • Vertical-lift thermal shock chamber with separate hot and cold temperature zones * Direct-drive system for reliable transfer between zones (maximum load 17 lb.) * Compact design with integrated mechanical refrigeration * Exterior is painted ESPEC grayish-violet, interior is stainless steel * Two specimen baskets * Tube for cables to test load, 2" diameter * Specimen power supply terminal * Includes caster and leveling pads for easy movement * Designed for performance with maximum load (lighter loads need additional mass for proper performance) 

      Refrigeration and Plenum:   * Refrigeration maintains user-set low temperature in cold zone * Two sirocco blower motors circulate the air (one per zone) * Non-CFC cascade refrigeration system using 2-hp compressors * Quiet operation with sound levels below 60dB 

      ESPEC's Exclusive P-310 Programmer:   * User-friendly touch-screen operation with 7" color display * The trend-graph display shows a record of setpoints and actual values * Cycle-time reduction function can automatically advance to the next step * 20 user-definable programs can be saved with alphanumeric names * System alarms are stored in memory for historical review  * Built-in timer functions allow the chamber to be started or shut down automatically * New: Ethernet with browser-based access is standard, plus USB

    General Specifications
    Depth 9.1 in
    Height5.8 in
    Width 12.5 in
    Additional Specifications

    Interior Volume: 0.4 cu. ft. 
    Temperature Range: -65 to 200 degrees celcius

    Looking for New or Used Equipment?

    Shop on LabX

    Shop on Labx.com