ESPEC - TCC Rapid-Rate Cycling Chambers

Manufactured by  ESPEC
Follow this Equipment

Designed for quick changes in specimen temperature

Through simulation of wind volume and wind speed, TCC-150 can minimize specimen temperature variations, enabling more accurate quick temperature change testing. For specimen temperature, the ramp rate is 15°C/min. For air temperature,the ramp rate is 23°C/min (temperature heat-up average).   
   
To maintain a constant temperature change rate for test specimens, the TCC-150 uses a sensor (positioned by the user)for specimen temperature measurement,and a newly-developed high-speed controller that enables highly precise specimen temperature control. This controller enables measurement and control processing at a higher speed than conventional controllers.
Active Questions & AnswersAsk a Question

There are no current Discussions

Environmental Chambers Service ProvidersView All (20)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of TCC Rapid-Rate Cycling Chambers
  • Large-volume test area The test area can contain up to sixty substrates, when set vertically * Easy wiring access Clear cabinet sides allow easy access for specimen measurement * Cable ports are provided on the right as well as left sides of the chamber * Door hinge with self-closing prevention 

    Site requirements: * Main Power: North American standard 208V (alternate international power: 200V, 220V, 380V, or 400V) * Cooling water supply * Quiet operation with sound levels below 65dB 

    Available options: * Paperless recorder with color display and CompactFlash storage * Strip chart recorder * Computer interface (IEEE-488 or RS-232) * Overcool protection * Casters * Specimen basket / shelf bracket

General Specifications
Depth 16 in
Height20 in
Width 32 in
Additional Specifications

Interior Volume: 6 cu. ft. 
Temperature Range: -70 to 180 degrees celcius 
Humidity Control: No

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com