ESPEC - Settling Dust Chambers
Manufactured by ESPEC
Easy loading clam-shell design
The ESPEC EDC dust chambers provide a ready-made solution to common dust test standards for automotive and electronic-cabinet requirements. Often specified for use with "Arizona fine dust", these units can also be used with talcum or concrete powder. The chamber has a "clamshell" type door/lid for easy front-loading, compared with top-loading chambers. Optional reach-in glove ports allow rotating the test sample without opening the door.
Test standards met:
SAE J575 (Rev. NOV2006), Section 4.5
ISO 20653 (2006-08-15), Section 8.3.1
DIN 40050, Part 9, IP Codes 5K and 6K, vertical dust flow
IEC EN 60529 (IEC 529), IP-5 and IP-6, vertical dust flow (with optional underpressure mode)
IEC EN 60068-2-68 (IEC 68-2-68), LA2, vertical dust flow
Test standards met:
Active Questions & AnswersAsk a Question
There are no current Discussions
Environmental Chambers Service ProvidersView All (20)
Documents & Manuals
There are no Documents or Manuals available.
Features of Settling Dust Chambers
Stainless steel interior and exterior * W-shaped bottom for improved dust collection & dispersion * Easy-access clamshell door with viewing window and optional glove ports * Mesh product shelf * Two inch cable port * Timers for agitation and settling periods
Options: * Two reach-in glove ports * Dry air purge to maintain dryness * Evacuation (Underpressure) System for DUT, as required by IEC 60529 * ISO 12103-1 Arizona test dust
General Specifications
There are no General Specifications available.