PHCBi - Direct Heat & Air Jacket™
CO2 Cell Culture Incubator with inCu saFe™ copper-enriched stainless steel.
These CO2 incubators are designed for a wide range of applications in biomedical, pharmaceutical and clinical laboratories.
Known for innovative and exclusive contamination control features, such as inCu saFeTM, a copper enriched stainless steel alloy with inherent germicidal protection against contaminants.
Patented Direct Heat & Air JacketTM temperature control ensures for accurate and uniform chamber temperature and CO2 levels.
Featuring inCu saFe™ copper-enriched stainless steel and Direct Heat, Air™ temperature control. By combining the corrosion resistance of stainless steel with the proven antibacterial properties of copper, this product offers an electro-polished copper-alloy-stainless interior that is sterile, long-lasting and maintenance-free. The sterile environment promotes the integrity of samples, valid test results and the safety of laboratory staff. This exclusive copper stainless steel alloy offers a significant advantage for contamination control.
Active Questions & AnswersAsk a Question
There are no current Discussions
CO2 Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of Direct Heat & Air Jacket™
- inCu saFe™ copper-alloy-stainless interior, shelves and plenum
- Patented Direct Heat, Air™(DHA) Incubator Heating System
- More useable space with HEPA filters located out of chamber
- Polyurethane insulation barrier
- Direct heating elements blanket the chamber
- Independent bottom heater adjustment allows relative decrease in RH level
- Door heater prevents condensation on glass inner door
- Tempered glass inner door allows sample viewing
inCu saFe Interior Known for innovative and exclusive contamination control features such as inCu saFe™, a copper enriched stainless steel alloy with inherent germicidal protection against contaminants. InCu saFe™ expresses a natural germicidal attribute to inhibit the growth of mold, fungi, mycoplasma and bacteria.
Direct Heat and Air Jacket Temperature™ Control Patented Direct Heat and Air Jacket™ temperature control ensures for accurate and uniform chamber temperature and CO2 levels. The MCO-17AC/34AC is microprocessor controlled to maintain temperature uniformity and optimum humidity levels.
CO2 Control Available with high precision, reliable thermal conductivity (T.C.) CO2 sensor.
Anti Contamination Design Benefits
- Circulation blower and CO2 injection cuts off when door is opened, keeping contaminated outside air from being drawn into the chamber.
- Full rounded corners in the interior chamber are constructed of electro-polished copper-alloy stainless steel. Copper-alloy stainless steel plenums, shelves and brackets extend contamination control to the chamber interior. All are easily removed for cleaning.
Control, Alarm and Monitoring A range of setpoint, alarm and programmable inputs are established through the use of an intuitive keypad. Extra large digital displays are easy to read.
- Tactile feedback, touch pad and entry keys simplify operation
- Standard parameters are factory-set for quick start-up, and all parameters can be changed as required.
- A remote alarm terminal mounted at the rear of the cabinet can be connected to an external remote alarm system.
General Specifications
There are no General Specifications available.
Additional Specifications
MCO-17AC (Single Chamber)
Shelves: Standard 5, Max 7
Exterior Finish: Baked on acrylic finish on galvanized stainless steel
Interior Finish: Copper alloy stainless steel
Door: Baked on acrylic finish on galvanized stainless steel w/door heater
Inner Door: Tempered Glass
Insulation: Foam in place polyurethene (non CFC)
Air Circulation System: Gentle air circulation, upward flow
Temperature
Heating Method: Direct Heat and Air (DHA) Jacket System
Temperature Control: Microporcessor P.I.D. Control
Humidifying System: Natural evaporation with water in humidity pan
CO2
CO2 Control: Microprocessor Control (sensor: Thermal Conductivity)
CO2 Inlet Pressure: 5-7 PSI
Series Modals
PHCBi - MCO-17AC
[+] View Model SpecificationsCO2 Incubator Type | Direct Heat |
Depth | 24 in |
Humidity | 95% ± 5% RH (at: 20°C, 60% RH) |
Temperature Uniformity | 0.2 °C |
Height | 35.4 in |
Internal Depth | 19.8 in |
Internal Height | 26.2 in |
Width | 24.4 in |
Internal Width | 19.2 in |
Power Requirements | 115V, 60hz, Amps: 3.6A, Plug/Breaker: NEMA 5-15P/15A, 405 W consumption |
Chamber Volume | 5.8 cu. ft. |
CO2 Sensor | Thermal Conductivity (TC) |
CO2 Range | 0 to 20 % |
Weight | 185 lbs |
Incubator Orientation | Benchtop |
Additional Model Specifications | Shelves: Standard 5, Max 7 Exterior Finish: Baked on acrylic finish on galvanized stainless steel Interior Finish: Copper alloy stainless steel Door: Baked on acrylic finish on galvanized stainless steel w/door heater Inner Door: Tempered Glass Insulation: Foam in place polyurethene (non CFC) Air Circulation System: Gentle air circulation, upward flow Temperature Heating Method: Direct Heat and Air (DHA) Jacket System Temperature Control: Microporcessor P.I.D. Control Humidifying System: Natural evaporation with water in humidity pan CO2 CO2 Control: Microprocessor Control CO2 Inlet Pressure: 5-7 PSI Alarm system: Audible and visual alarm Temperature, CO2, Door alarm Independent overheat protection circuit sensor Remote alarm contacts |
PHCBi - MCO-34AC
[+] View Model SpecificationsCO2 Incubator Type | Direct Heat |
Depth | 24 in |
Humidity | 95% ± 5% RH (at: 20°C, 60% RH) |
Temperature Uniformity | 0.2 °C |
Height | 70.8 in |
Internal Depth | 19.8 in |
Internal Height | 26.2 in |
Width | 24.4 in |
Internal Width | 19.2 in |
Power Requirements | 115V, 60hz, Amps: 3.6A, Plug/Breaker: NEMA 5-15P/15A, 810 W consumption |
Chamber Volume | 11.6 cu. ft. |
CO2 Sensor | Thermal Conductivity (TC) |
Weight | 370 lbs |
Incubator Orientation | Floor Standing |
Additional Model Specifications | Shelves: Standard 10, Max 14 Exterior Finish: Baked on acrylic finish on galvanized stainless steel Interior Finish: Copper alloy stainless steel Door: Baked on acrylic finish on galvanized stainless steel w/door heater Inner Door: Tempered Glass Insulation: Foam in place polyurethene (non CFC) Air Circulation System: Gentle air circulation, upward flow Temperature Heating Method: Direct Heat and Air (DHA) Jacket System Temperature Control: Microporcessor P.I.D. Control Humidifying System: Natural evaporation with water in humidity pan CO2 CO2 Control: Microprocessor Control CO2 Inlet Pressure: 5-7 PSI Alarm system: Audible and visual alarm Temperature, CO2, Door alarm Independent overheat protection circuit sensor Remote alarm contacts |