HORIBA - EMGA-620W/C
Manufactured by HORIBA
No Documents
EMGA-620W/C - Oxygen/Nitrogen Combustion Analyzer
The HORIBA EMGA-620W/C Series determines the high concentration oxygen and nitrogen (up to 60%) contained in ceramics, superconductors and other new materials using the inert gas fusion method. The oxygen is measured as carbon monoxide by a non-dispersive infrared detector and the nitrogen is measured by a thermal conductivity detector.
The EMGA-620W/C series are equipped with an abundance of analytical functions and provides fast and high precision analysis to suit a broad range of user needs. It is ready for a variety of application from research and development to on-site analysis.
The EMGA-620W/C series are equipped with an abundance of analytical functions and provides fast and high precision analysis to suit a broad range of user needs. It is ready for a variety of application from research and development to on-site analysis.
Active Questions & AnswersAsk a Question
There are no current Discussions
Elemental Analyzers Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of EMGA-620W/C
- Different analysis modes for different samples
- Precision control of extraction furnace
- Multistep slope power control
- Real-time temperature hold function
- Temperature programmable pattern memory function
- Peak level setting function
- Multifunctional graphic printout
- Dual sample/flux introduction mechanism(HORIBA patent)
General Specifications
| Depth | 920 mm Combustion unit |
| Height | 725 mm Combustion unit |
| Width | 550 mm Combustion unit |
| Power Requirements | Main unit: 200/220/240V, 50/60Hz |
| Weight | 170 kg Combustion unit |
Additional Specifications
Dimensions:
Analyzer unit 450W×920D×725H
Weight:
Analyzer unit approx 100kg
Principle
Iner gas fusion in impulse furnace in He flow
Oxygen: NDIR
Nitrogen: TC
Range
Oxygen:0-60%
Nitrogen:0-60%
Up to 100% wt is possible by decreasing the sample weight.
Accuracy
Oxygen:
sn-1≤0.02%(m/m) or CV≤1,5%
Nitrogen:
sn-1≤0.2%(m/m) or CV≤0,5%
Sample weight:
1,0g standard
Sensitivity:
0,01ppm
Analysis time:
Approx. 130 sec from gas extraction to measurement result display
Depending on the sample and extractions.