HORIBA - ACTIVA-M
Manufactured by HORIBA
The Master in True Multi-line Analysis
ACTIVA-M, a bronze award winner for best new product at Pittcon 2007 as Master in multi-line analysis by ICP-AES, combines superb instrumental performance with innovative and interactive assistance software tools.
Active Questions & AnswersAsk a Question
There are no current Discussions
ICP Systems Service ProvidersView All (15)
Documents & ManualsView All Documents
Features of ACTIVA-M
- Extended spectral range from 120 to 800 nm
- Few matrix effects and high spectral selectivity which allows a greater choice of non-interfered wavelengths to be used for multi-line analysis
- Practical dynamic range of 107 with a linear concentration range over five decades minimum, which avoids detector saturation and risk of curvature, and consequently expands the use of the selected line, thereby improving the statistics of the results
General Specifications
Depth | 28.6 in |
Height | 29.5 in |
ICP Detection Method | Atomic Emission |
Width | 56.3 in |
Power Requirements | Single phase, 220-240V, 50-60Hz, 5kVA |
Optical System | Thermo-regulated, 0.64 meter focal length, dual back-to-back gratings (4343 g/mm & 2400 g/mm with optical resolution < 10 pm & 18 pm respectively), nitrogen or argon purge |
Weight | 430 lbs |
Wavelength Range | 120 to 800 nm |
Additional Specifications
Cooling:
GenCo cooler for generator and coil
Exhaust:
Direct exhaust connection for plasma compartment
Plasma:
Fully demountable torch, 3 mm i.d. injector, 12 l/min plasma gas, 0.2 l/min sheath gas
Sample introduction:
Concentric glass nebuliser and glass cyclone spray chamber, 3-channel peristaltic pump
Detection:
Back-illuminated, 2048 x 512 pixels, 13.5 x 13.5 Μm pixel size, - 40°C, 100 000 electrons as full well capacity, 1 MHz Peltier Cooled.