BINDER - MKF series

Manufactured by  BINDER
Follow this Equipment

Environmental simulation chamber for complex alternating climate profiles

Environmental simulation chamber for complex alternating climate profiles  
  
A BINDER MKF series chamber is ideally suited for all testing based on current temperature and climate testing methods according to DIN and IEC standards. Their ease of operation and comprehensive standard equipment ensures something special in use.   
      
  1. State-of-the-art reliability  
  2. User-friendly chamber interior  
  3. Comprehensive standard equipment  
  
Areas of application:  
      
  1. Automotive  
  2. Electronics / Semiconductor Industry  
  3. Plastics Industry  
Active Questions & AnswersAsk a Question

There are no current Discussions

Environmental Chambers Service ProvidersView All (20)

Request Support
Features of MKF series
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results  
  • Temperature range without humidity -40 °C to 180 °C (-40 °F to 356 °F), with humidity 10 °C to 95 °C (50 °F to 203 °F)  
  • Humidity range 10 % RH to 98 % RH  
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments   
    • User friendly LCD screen  
    • Easy-to-read menu guide  
    • Integrated electronic chart recorder  
    • Variety of options for the graphic display of process parameters  
    • Real time clock  
  • Electronically controlled humidification and dehumidification system with capacitive humidity sensor and pressurized steam humidification  
  • Integrated water storage tank  
  • Heated viewing window with interior illumination  
  • Programable condensation protection for test material  
  • Adjustable ramp functions via program editor  
  • Environmental friendly refrigerant R 404a  
  • 230 V power socket on the right-side operating panel  
  • Temperature safety device, Class 2 (DIN 12880)  
  • 4 potential-free relay outputs that can be activated via MCS controller  
  • Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software  
  • 1 access port Ø 50 mm (1.97 inch), left side  
  • 1 stainless steel rack included  
  • 4 castors (with 2 brakes)  
  • BINDER test certificate
General Specifications

There are no General Specifications available.

Series Modals

BINDER - MKF 115

[+] View Model Specifications

BINDER - MKF 240

[+] View Model Specifications

BINDER - MKF 720

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com