AMETEK Brookfield - STT-100 In-Line Viscometer
Manufactured by AMETEK Brookfield
For In-Line System Applications
The STT-100® In-Line Viscometer is designed to provide years of trouble-free service in closed loop systems which require constant monitoring and associated control of product viscosity. This instrument is 3A approved and has been used successfully in many food applications.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of STT-100 In-Line Viscometer
- Conforms to 3A sanitary conditions and has clean-in-place (CIP) design
- Continuous measurement eliminates need for "Grab" sampling and allows for prediction and constant control of final product properties
- Concentric cylinder geometry (Couette type) provides viscosity measurments at defined shear conditions
- Defined shear means agreement with Brookfield Laboratory measurements at equivalent shear rates
- Constant or variable speed motors available 4-20 mA output signal provides a variety of display and control capabilities
- Capable of a wide range of pressures, temperatures, viscosities, flow and shear rates
- Measurement "Zone" is protected from main flow, allowing accurate, repeatable measurement under variable conditions
- Mounts in-line supported by connections: Available in 3? or 4? pipeline connections; sanitary, threaded or flanged
- Easy to check and maintain calibration
- "Explosion Proof" configurations available for operation in hazardous environments
General Specifications
On-Line Monitoring | 1 |
Power Requirements | 115 Vac: 50/60 Hz |
Maximum Viscosity | 250000 cP |
Viscosity Range | 350 to 250000 mPa.s |
Additional Specifications
Speeds: single speed: application specific
Input Power: 115 Vac: 50/60 Hz
Output: 4 - 20 mA