AMETEK Brookfield - TT-220 Probe Viscometer
Manufactured by AMETEK Brookfield
For Open Tank Applications
The TT-220 Process Viscometer is intended for open tank applications (5-20 gallon, 20-75 liters) requiring constant viscosity monitoring and or control. The TT-220 is often used in coatings or printing applications. The TT220 is a rotational coaxial cylinder (Searle) viscometer providing true dynamic viscosity measurements at defined shear rates, from as low as 0.1 sec-1 to as high as 600 sec-1.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of TT-220 Probe Viscometer
- LED displays indicate process viscosity vs. set point
- Optional RS485 computer interface
- Displays viscosity in cP, mPa·s, or orifice cup seconds
- Senses/responds continuously
- Control capability includes PID, auto-tune PID, or on/off
- User selectable high/low alarms
- Easy to start-up, operate, and clean
- Wetted parts are 300 series stainless steel
- Can measure at API-defined shear rate of 511 sec-1, or "LSRV" drilling mud shear rate of 0.15 sec-1
General Specifications
On-Line Monitoring | 1 |
Temperature Range | -40 to 100 °C |
Viscometer Type | Rotational |
Maximum Viscosity | 100000 cP |
Viscosity Range | 5 to 100000 cP |
Additional Specifications
Viscosity Range: 5 to 100,000 cP
Accuracy: ±1% of full scale range
Temperature Range: -40°C to 100°C
Output: mechanical relay or 4-20 mA
Input Voltage: 115 Vac, 230 Vac or 24 Vdc