Thermo Scientific - Herasafe KSP
Manufactured by Thermo Scientific
Herasafe* KSP Class II Biological Safety Cabinet
Thermo Scientific triple-filter cabinet is ideal for preparing cytotoxic drugs and for use in pharmaceutical control labs. Herasafe KSP biological safety cabinets exhaust air 100,000 times more effectively than conventional two-filter systems. These units are perfect wherever protection and safety are of paramount importance—in biotechnology, microbiology, pharmaceutical and clinical facilities.
While featuring all benefits of the previously described models KS, in addition our HERAsafe KSP Class II safety cabinets incorporate the newly-developed segmented HEPA filter system for significantly higher contamination protection when working with hazardous samples and materials. This additional filter system purifies inlet, supply and exhaust air 100,000 times more effectively than conventional 2-filter systems. Its outstanding efficiency means that supply and exhaust air filters do have an almost eternal life time.
While featuring all benefits of the previously described models KS, in addition our HERAsafe KSP Class II safety cabinets incorporate the newly-developed segmented HEPA filter system for significantly higher contamination protection when working with hazardous samples and materials. This additional filter system purifies inlet, supply and exhaust air 100,000 times more effectively than conventional 2-filter systems. Its outstanding efficiency means that supply and exhaust air filters do have an almost eternal life time.
- Reduced risk – contamination of inner air ducts is virtually impossible.
- Easy maintenance – filter cartridges can be replaced while the cabinet is in operation. Cartridges snap into position over a gasket.
- Safe, easy disposal – filter cartridges can be disposed of by incineration.
Active Questions & AnswersAsk a Question
There are no current Discussions
Biological Safety Cabinets Service ProvidersView All (5)
Documents & ManualsView All Documents
Features of Herasafe KSP
Cabinets offer superior personnel and product protection with best-in-class airflow and filter technology; exceptionally comfortable ergonomic design that prevents user fatigue and promotes safe working habits; and maximized energy efficiency for environmental protection and significant cost savings. Safety and Protection
- 100,000 times better air filtration
- HEPA filters guarantee maximum filtration efficiency of 99.995% at the most penetrating particle size (MPPS)
- Segmented H14 HEPA filter system directly below work area protects inner air ducts, plenums and fans; provides a cumulative filtration efficiency of 99.99999975% to downflow and exhaust airflow
- Pressure sensor monitoring ensures safe airflow across the entire work surface
- SmartFlow* digital technology maintains constant airflow during normal filter loading or temporary airflow obstruction due to foreign objects
- Independent alarm system immediately alerts to any airflow obstruction
Performance and Operation
- Interior eye-level display on rear wall for "at-a-glance" monitoring of safety parameters
- Performance factor (PER) indicates: cabinet is safe, cabinet is safe but time for service, cabinet should not be used
- Display parameters include downflow air velocity, cabinet malfunction, time of day, operating time of optional UV-C lights, total operating hours
- Timer for delayed start
- Stopwatch function
- Handheld control for use inside cabinet eliminates glove changes before changing cabinet settings
Construction
- Motorized front window with adjustable 20cm working aperture slopes 10°
- DC motor technology uses energy efficiently with lower heat output
- Aerosol-tight window sealing for additional protection when cabinet is in stand-by mode
- Frameless front sash and side glass window yields unobstructed view of the total work area
- Scratch-resistant stainless-steel work surface with indentations that trap spilled liquids
Ordering Alerts: Adjustable stand options with electric or manual adjustment. Work surfaces available as single or segmented modules.
Compliance: Independently tested and certified to EN 12469 standard for Class II biological safety cabinets by T?V Nord. Cabinets with single-piece worktops are independently tested and certified to the DIN 12980 standard "Safety Cabinets for Handling Cytotoxic Substances," requiring the highest personnel, product and environmental protection.
General Specifications
There are no General Specifications available.
Additional Specifications
Filter type: H14 HEPA EN 1822
Filter Efficiency: 99.995% at 0.3µm particle size
Sash Opening: 20cm; 77.3cm max.
Load Bearing Capacity: 50kg (one-piece work surface); 25kg (single segmented worksurface)
Outlets: 1 duplex, each side wall
Port: 4 access (2 on each side wall)
Service Fixtures: Up to 4 installed through access ports; up to 6 additional factory-installed on rear wall
Series Modals
Thermo Scientific - KSP12
[+] View Model Specifications| Airflow (CFM) | 227 CFM |
| Depth | 880 mm |
| Height | 2265 mm |
| Internal Depth | 627 mm |
| Internal Height | 780 mm |
| Width | 1300 mm |
| Internal Width | 1200 mm |
| Power Requirements | 230 VAC, 50/60 Hz, 0.4 kW, 1.7 A consumption, 200W (operating setpoint); 40W (reduced flow mode) |
| Lighting | 79fc (>850lx) |
| Noise Level | 56 dB |
| Weight | 290 kg |
| Shipping Weight | 265 kg |
| Cabinet Type | Class II Type A2 |
| Filter Type | HEPA |
| Additional Model Specifications | Minimum doorway: 800 mm wide Work aperture: 200 mm high Max. lifting height of front window (not open): ~470 mm Working height (stand. support frame adjustable): 750-950 mm (support frame adjustable in 50 mm steps) Sash Opening: 20cm; 77.3cm max. Load Bearing Capacity: 50kg (one-piece work surface); 25kg (single segmented worksurface) Outlets: 1 duplex, each side wall Port(s): 4 access (2 on each side wall) Service Fixtures: Up to 4 installed through access ports; up to 6 additional factory-installed on rear wall Heat emission: (25°C room temperature) ~0.2 kW Ventilation System Exhaust air/inflow volume flow: ~400 m3/h Air circulation flow rate: ~830 m3/h Filter Technology Forced air/exhaust air filter: HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size Additional Exhaust Filter (AEF): HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size |
Thermo Scientific - KSP15
[+] View Model Specifications| Airflow (CFM) | 284 CFM |
| Depth | 880 mm |
| Height | 2265 mm |
| Internal Depth | 627 mm |
| Internal Height | 780 mm |
| Width | 1600 mm |
| Internal Width | 1500 mm |
| Power Requirements | 230 VAC, 50/60 Hz, 0.4 kW, 1.7 A consumption, 305W (operating setpoint); 70W (reduced flow mode) |
| Lighting | 116fc (>1250lx) |
| Noise Level | 58 dB |
| Weight | 320 kg |
| Shipping Weight | 310 kg |
| Cabinet Type | Class II Type A2 |
| Filter Type | HEPA |
| Additional Model Specifications | Minimum doorway: 800 mm wide Work aperture: 200 mm high Max. lifting height of front window (not open): ~470 mm Working height (stand. support frame adjustable): 750-950 mm (support frame adjustable in 50 mm steps) Sash Opening: 20cm; 77.3cm max. Load Bearing Capacity: 50kg (one-piece work surface); 25kg (single segmented worksurface) Outlets: 1 duplex, each side wall Port(s): 4 access (2 on each side wall) Service Fixtures: Up to 4 installed through access ports; up to 6 additional factory-installed on rear wall Heat emission: (25°C room temperature) ~0.2 kW Ventilation System Exhaust air/inflow volume flow: ~500 m3/h Air circulation flow rate: ~1040 m3/h Filter Technology Forced air/exhaust air filter: HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size Additional Exhaust Filter (AEF): HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size |
Thermo Scientific - KSP18
[+] View Model Specifications| Airflow (CFM) | 341 CFM |
| Depth | 880 mm |
| Height | 2265 mm |
| Internal Depth | 627 mm |
| Internal Height | 780 mm |
| Width | 1900 mm |
| Internal Width | 1800 mm |
| Power Requirements | 420W (operating setpoint); 70W (reduced flow mode) |
| Lighting | 121fc (>1300lx) |
| Noise Level | 58 dB |
| Weight | 350 kg |
| Shipping Weight | 365 kg |
| Cabinet Type | Class II Type A2 |
| Filter Type | HEPA |
| Additional Model Specifications | Minimum doorway: 800 mm wide Work aperture: 200 mm high Max. lifting height of front window (not open): ~470 mm Working height (stand. support frame adjustable): 750-950 mm (support frame adjustable in 50 mm steps) Sash Opening: 20cm; 77.3cm max. Load Bearing Capacity: 50kg (one-piece work surface); 25kg (single segmented worksurface) Outlets: 1 duplex, each side wall Port(s): 4 access (2 on each side wall) Service Fixtures: Up to 4 installed through access ports; up to 6 additional factory-installed on rear wall Heat emission: (25°C room temperature) ~0.2 kW Ventilation System Exhaust air/inflow volume flow: ~400 m3/h Air circulation flow rate: ~830 m3/h Filter Technology Forced air/exhaust air filter: HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size Additional Exhaust Filter (AEF): HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size |
Thermo Scientific - KSP9
[+] View Model Specifications| Airflow (CFM) | 170 CFM |
| Depth | 880 mm |
| Height | 2265 mm |
| Internal Depth | 627 mm |
| Internal Height | 780 mm |
| Width | 1000 mm |
| Internal Width | 900 mm |
| Power Requirements | 230 VAC, 50/60 Hz, 0.4 kW, 1.7 A consumption, 200W (operating setpoint); 40W (reduced flow mode) |
| Lighting | 74fc (>1000 lx) |
| Noise Level | 56 dB |
| Weight | 200 kg |
| Shipping Weight | 220 kg |
| Cabinet Type | Class II Type A2 |
| Filter Type | HEPA |
| Additional Model Specifications | Minimum doorway: 800 mm wide Work aperture: 200 mm high Max. lifting height of front window (not open): ~470 mm Working height (stand. support frame adjustable): 750-950 mm (support frame adjustable in 50 mm steps) Sash Opening: 20cm; 77.3cm max. Load Bearing Capacity: 50kg (one-piece work surface); 25kg (single segmented worksurface) Outlets: 1 duplex, each side wall Port(s): 4 access (2 on each side wall) Service Fixtures: Up to 4 installed through access ports; up to 6 additional factory-installed on rear wall Heat emission: (25°C room temperature) ~0.2 kW Ventilation System Exhaust air/inflow volume flow: ~300 m3/h Air circulation flow rate: ~600 m3/h Filter Technology Forced air/exhaust air filter: HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size Additional Exhaust Filter (AEF): HEPA H 14 EN 1822, 99.999% at 0.3 µm particle size |