This product is Discontinued
IKA - EUROSTAR power control-visc P7
Manufactured by IKA
IKA EUROSTAR power control-visc P7 for processing highly viscous media.
IKA® offers the ideal overhead stirrer for your stirring and mixing tasks in the lab - for lower to high viscosities. IKA® overhead stirrers effortlessly process stirring quantities of up to 200 liters. IKA® lab stirrers and overhead stirrers stand out due to their indispensable features, including an electronic safety circuit, a digital display, two speed ranges, and a controlling option via the lab software Labworldsoft®. A broad spectrum of stirring tools is the key to successful mixing. Functionality, safety, and longevity are the main goals in the development of IKA®'s overheard stirrers.
The IKA EUROSTAR power control-visc P7 is a laboratory stirrer with a high torque, 7-fold transmission reduction for processing highly viscous media.
Also available:
EUROSTAR digital
EUROSTAR power basic
EUROSTAR power control-visc
EUROSTAR power control-visc P1
EUROSTAR power control-visc P4
The IKA EUROSTAR power control-visc P7 is a laboratory stirrer with a high torque, 7-fold transmission reduction for processing highly viscous media.
Also available:
EUROSTAR digital
EUROSTAR power basic
EUROSTAR power control-visc
EUROSTAR power control-visc P1
EUROSTAR power control-visc P4
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Updated byWMusa
Overhead Stirrers Service ProvidersView All (4)
Documents & ManualsView All Documents
Features of EUROSTAR power control-visc P7
- Constant speed by microprocessor control
- Digital display presents rated - / actual speed
- Infinitely adjustable without gear shifting
- Slim casing
- Quiet operation
- Safety circuit
- Non-locking, overload capabilities
- Enhanced safety as a result of smooth start
- Integrated torque trend display for viscosity control
- Analog interface for recording speed and torque
- RS 232 interface
- Agitator shafts are not push-through
General Specifications
| Depth | 190 mm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 200 mm |
| Height | 330 mm |
| Maximum Stirring Quantity | 40 L |
| Maximum Stirring Speed | 290 rpm |
| Width | 80 mm |
| Maximum Torque | 380 N.cm |
| Power Requirements | 230 / 115 / 100 V, 50/60 Hz, 130 watts |
| Maximum Viscosity | 150000 mPa.s |
| Weight | 4.9 kg |
| Motor | Input: 130 W, Output: 110 W |
| Stirrer Control | Electronic |
Additional Specifications
Speed display: LCD
Output max. at stirring shaft: 95 watts
Permissible ON time: 100 %
Speed control: Stepless
Stirring element fastening: Chuck
Chuck range min. diameter: 0.5 mm
Chuck range max. diameter: 10 mm
Hollow shaft (push-through when stopped): None
Fastening on stand: Extension arm
Torque display: Yes
Torque measurement: Trend
Nominal torque: 3.8 Nm
Protection class according to DIN EN 60529: IP 42
RS 232 interface: Yes
Analog output: Yes