Anton Paar - Sampling systems for the L-Dens 7000 series
Part of your process – real-time measurement by continuous sample flow
Active Questions & AnswersAsk a Question
There are no current Discussions
Bulk Density Tester Service ProvidersView All (9)
Documents & Manuals
There are no Documents or Manuals available.
Features of Sampling systems for the L-Dens 7000 series
Your process determines the framework – we will find the best-fitting solution Whatever fits best – we will find the perfect solution with our sensor system, which can be fully integrated.
Low-viscosity fluids and liquid gases in pipelines usually can be sampled via inline adapters inserted in the main pipe. Minimum flow speed and the resulting dynamic pressure are sufficient to ensure proper sample exchange between the main pipe and the sensor.
Bypass solutions will be implemented wherever the pressure difference across pumps in the main line can be used to let the media flow through the sensor.
For higher viscosity fluids or low flow rates we provide pumps for actively supplying the sensor with the media.
Fully integrated – full support during all operating modes During production the sensor is supplied with product via an inline adapter, bypass, or pump. The flow is kept at a sufficient level, the measuring system does not cause any pressure drops. With the sight glass you can visually check the media for flow, particles, and bubbles.
For calibration purposes reference samples can be taken from the main pipe using the included cut-off and sample valves.
During cleaning of the sensor the integrated rinsing connection is used to open the sample path for sensor rinsing. It is not required to dismount the sensor.
Customization – your needs and cost savings are the benchmark Modular reference systems form the basis for easy and cost-efficient customization. Variables such as used flanges and insertion depths or conditions such as pressure and temperature ratings can be varied with or without minimum extra cost.
On request, additional components such as filters, flow monitors, mounting supports, housings, etc. are integrated. Our engineering team is prepared to integrate customer-provided parts as well, which also keeps the costs to a minimum.
Solutions for hazardous environments and media can, of course, also be implemented. Your specifications define the used materials, components, and design of the sampling and measuring system.
General Specifications
There are no General Specifications available.