1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Flow Meters
    4.  / 
  4. Teledyne Isco - 3010 Ultrasonic Flow Transmitter

Teledyne Isco - 3010 Ultrasonic Flow Transmitter

Manufactured by  Teledyne Isco
Follow this Equipment

Fixed-site flow/level transmitter with non-contacting Ultrasonic sensor.

The 3010 is AC powered for permanent installation. It has no internal data storage, but provides 4-20 mA analog and RS-232 serial outputs, as well as relay switches and pulsed DC totalizer outputs for flexible interfacing and control.  
 
The ultrasonic level sensor is mounted above the flow stream and transmits a sound pulse that is reflected from the liquid surface. The elapsed time between sending a pulse and receiving an echo determines the level in the channel. Because the sensor does not contact the liquid, the 3010 provides long-term dependability with no scheduled maintenance. It is ideal for measuring flows containing harsh chemicals, grease, suspended solids or silt.  
 
A keypad and backlit LCD make programming fast and easy. Level-to-flow rate conversions for most weirs and flumes are built in, or you can enter an equation or use an optional Characterization PROM chip. When programming is complete, the 3010 displays data in selectable units of measure. A non-resettable totalizer gives you a permanent record of flow.
Active Questions & AnswersAsk a Question

There are no current Discussions

Flow Meters Service ProvidersView All (6)

Request Support
Features of 3010 Ultrasonic Flow Transmitter

Standard Features 

  • Lockable enclosure is rated NEMA 4X and IP56 for watertight, dust-tight, corrosion resistant operation.  * Built-in heaters ensure dependable outdoor operation in cold climates.  * A sampler relay will signal your sampler to collect flow proportioned samples.  * Built-in level to flow conversions are included for most weirs, flumes, and other devices  * Non-resettable mechanical totalizer provides tamper-proof record of cumulative flow 

    Applications * Flow-proportional control of processes such as chlorination or pH neutralization using the 4 to 20 mA output  * Optional alarm relays activate external equipment such as pumps, alarms and indicators.  * Transmitting flow data to computer or SCADA system using RS-232 output 

    Options and Accessories * Optional alarm relays activate external equipment such as pumps, alarms and indicators.  * Characterization PROM can be factory configured to your primary device  * Remote totalizer. Eight digit non-resettable totalizer in conduit mount enclosure.* Connects to flow transmitter with 1,000 ft. maximum cable length

General Specifications

There are no General Specifications available.

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com