Teledyne Isco - 1000D Syringe Pump
1-liter capacity for big jobs
Imroved displacement resolution on this new model gives finer control over motor movement. Coupled to our patented servo circuit, this means the 1000D can deliver excellent flow accuracy without the need for external flow meters. You get low-flow precision at any pressure, plus the high speed smoothness and power of a DC motor.
The 1000D features 1/4" NPT fittings on inlet and outlet ports for less restriction in filling with viscous materials and for easy connection in pilot plant and other common applications. It also has a special piston wash gland that lets you rinse the cylinder wall behind the primary seal, reducing or eliminating corrosive or abrasive effects of the fluid being dispensed. The result is a longer lasting pump with lower maintenance costs.
Active Questions & AnswersAsk a Question
There are no current Discussions
Lab Pumps Service ProvidersView All (3)
Documents & ManualsView All Documents
Features of 1000D Syringe Pump
1000D's piston wash gland reduces effects of abrasive particles on seals and cylinder * Integral button-style pressure transducer in cylinder cap assures excellent stability and repeatability. * Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance. * Each ISCO D-Series syringe pump is bench tested at the factory. * Cylinder wash system protects the seals from deposits. * Exclusive "Smart Key" controller. All ISCO D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:
Single pump independent constant flow or pressure Single pump flow - or pressure - ramp programming Single pump dispensing Dual pump continuous constant flow or pressure Dual pump concentration gradients Four-pump configured systems * RS-232/485 serial interface for computer control or monitoring of operating parameters. * Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits. * Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance. * Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.
General Specifications
There are no General Specifications available.
Additional Specifications
Capacity: 1,015 mL
?Flow Range: ?0.001 - 408 mL/min
?Flow Accuracy: 0.5% of setpoint
?Displacement Resolution: 25.4 nL
?Pressure Rang: ?0.7 to 137.9 bar (10 to 2,000 psi)
?Standard Pressure Accurac: ?0.5% Full Scale
?Optional Pressure Accuracy: 0.1% Full Scale
?Wetted Material: ?Nitronic 50, PTFE, Hastelloy, C-276
?Plumbing Port: ?1/4" NPT
?Operating Temperatur: ?5 to 40 °C Ambient
?Power Requirement: ?100 VAC, 117 VAC, 234 VAC, 50/60 Hz
?Dimensions (H x W x D: ?102 x 27 x 47 cm (40.3 x 10.7 x 18.4 inch)
?Weight: ?Pump - 38.5 kg (84.9 lb)
Controller - 3.0 kg (6.5 lb)