BWB Technologies USA LLC - BWB XP Flame Photometer

Manufactured by  BWB Technologies USA LLC
Follow this Equipment

Ready to use straight out of the box! General Purpose Flame Photometer! Award winning 5-channel instrument.

Ready to use straight out of the box! General Purpose Flame Photometer! Award winning 5-channel instrument.   
   
Product features:    
Simulataneous detection and display of 5 atoms of interest    
Intuitve user interface for true ease of use    
Display prompts step by step operation   
Built-In air compressor    
Solution and labware include   
Data sharing via ps link via usb   
Operator independent determination of results   
5 user selectable units of measure   
User selectable decima; [;aces    
Inergrated printer option user readly available paper   
IQ, OQ, PQ web-basedcertification available: IQ OQ PQ is completely unique in the analytical instrumentation area. Available in English, Russian, German, Mandarin, French and Spanish. More lanuages in development    
Correction of CA for the interference from high levels of NA    
The BWB XP is the first and only 5 channel flame photometer with simultaneous detection and display of all 5 elements.The BWB XP was designed from the ground up, using new, innovative and modern technology to give unsurpassed levels of accuracy, usability and reliability while significantly reducing analysis time. Our customers do not need to waste valuable time changing filters and re-calibrating when a different measurement is required, as is a common requirement in all other Flame Photometer designs from 1951 to the present.   
   
With clean lines and contemporary bright colour schemes, the XP looks exceptionally modern and will fit into any laboratory. The instrument has a large LCD display, which can be viewed easily from any angle.   
   
Our metal casework provides a sturdy portable instrument and enables future recycling opportunities. ROHS compliant components and materials are used wherever possible.   
   
The BWB Carbon Footprint is exceptionally low, in keeping with corporate objectives of being a responsible manufacturer.   
   
Unlike other manufacturers who charge extra for vital accessories, BWB include everything required to use the product straight out of the box. Just add Gas!! (Propane, LPG or butane).   
   
We also provide as standard, data sharing via USB from the BWB XP to your PC. This ties the output of the BWB Flame Emission Spectrometer (FES) to the Internet or your company intranet systems and facilitates Distributed Control which is vital for Multi-National companies, Universities and various Governmental agencies.   
   
Technial Data   
Sample rate: 2 – 3.5ml/min   
   
   
Tubing materials: Silicone and Tygon®    
   
   
Required desk space for Instrument    
   
50cm (H) x 45cm (W) x 45cm (D)*   
   
For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.   
   
   
Instrument size    
   
XP Flame Photometer   
51cm (H) x 38cm (W) x 41cm (D)   
(20in x 14in x 16in)   
   
   
Shipping   
62cm (H) x 55cm (W) x 47cm (D)   
(24in x 22in x 19in)   
   
   
Weight: XP Flame Photometer – 15.3kg (33.7lbs), shipping – 25kg (55.1 lbs)   
   
   
Optimal range:   
   
Single point calibration   
   
Na 0.1 – 60ppm    
   
K 0.05 – 100ppm    
   
Li 0.05 – 50ppm    
   
Ca 1.0 – 100ppm    
   
Ba 1.6 – 100ppm   
   
   
Multi Point Calibration   
   
Na 0.1 – 1000ppm    
   
K 0.05 – 1000ppm    
   
Li 0.05 – 1000ppm    
   
Ca 1.0 – 1000ppm    
   
Ba 5.0 – 3000ppm    
   
   
Reproducibility:    
   
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).    
   
Specificity:    
   
Na/K/Li = <0.5% to each other when equal in concentration at <100ppm   
   
   
Limit of detection (LOD) and   
limit of quantification (LOQ):    
   
LOD LOQ    
   
Na – 0.03ppm Na – 0.1ppm   
   
K – 0.02ppm K – 0.05ppm   
   
Li – 0.02ppm Li – 0.05ppm   
   
Ca – 0.3ppm Ca – 1ppm   
   
Ba – 1.6ppm Ba – 5.0ppm   
   
   
Time to stability: Less than 15 seconds after sample is introduced into the flame.   
   
   
Ions measured: Simultaneous measurement of Na, K, Li, Ca, Ba   
   
   
Interfaces :    
   
USB   
   
0-2.5 volt output (based on sample concentration linked to element of users choice)   
   
Optional 4-20mA output in place of the above   
   
Optional integrated printer .csv and .pdf generated reports and files via FP-PC software   
   
   
Recommended minimum warm up time based on ambient temperature:    
   
21ºC – 40 minutes    
   
   
Power requirements:    
   
100V – 250V AC at 50 or 60Hz automatically selecting    
   
   
Fuel requirement:    
   
Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min   
   
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.   
   
   
Readout:    
   
LCD, four line, alpha numeric, back lit.
Active Questions & AnswersAsk a Question

There are no current Discussions

Elemental Analyzers Service ProvidersView All (6)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features

There are no Features available.

General Specifications

There are no General Specifications available.

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com