Mechanical Auto-Cooling from -50 to 500°C without the Need for Liquid Nitrogen  Consecutive measurements at temperatures between -50 and 500°C are enabled using the DSC-60 Plus series with the TAC-60i mechanical auto-cooling system. The system consists of an immersion cooler and does not use liquid nitrogen. 

Consistent Auto-Cooling Between -130 and 500°C with Liquid Nitrogen  The TAC-60L liquid nitrogen auto-cooling system reduces pulsation and maintains a stable baseline by controlling the amount of liquid nitrogen in the DSC-60 Plus series main unit’s cooling chamber to keep a constant supply flow rate. In addition, when sub-ambient measurement is not required, the detector and furnace design enables the DSC-60 Plus series to be run to 500°C without needing liquid nitrogen. 

Automated Measurements at Low Temperature  Compatibility of the DSC-60A Plus model with the TAC-60L liquid nitrogen auto-cooling system and the TAC-60i mechanical auto-cooling system results in automated low-temperature differential scanning calorimetry measurements of up to 24 samples. Between tests, these cooling units return the furnace to a specified temperature to eliminate condensation during sample exchange.