Hitachi - Fluorescence Spectrophotometer | F-2700/F-2710

Manufactured by  Hitachi
Follow this Equipment

The Hitachi F-2700/F-2710 Fluorescence Spectrophotometers are available in two configurations depending on your...

The Hitachi F-2700/F-2710 Fluorescence Spectrophotometers are available in two configurations depending on your laboratory's needs. The F-2700 can be used as stand-alone and also PC-controlled; the F-2710 is a PC-controlled-only model. 
 
The F-2700 in stand-alone configuration using the built-in keyboard and LCD screen is ideal for teaching and routine measurements. Adding PC control expands its capabilities to biotech research and quantum yield applications. 
 
The F-2700/F-2710 feature an excellent signal-to-noise ratio (800 S/N RMS, Raman band of water at 5 nm bandwidth). With PC control the scan speed is as high as 12,000nm/min, making it ideal for 3-D scan measurements. A wide array of accessories is available, including automatic sampling, quantum yield measurement, full-range spectral correction, and 100µL micro cell.
Active Questions & AnswersAsk a Question

There are no current Discussions

Need Equipment Support?

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Fluorescence Spectrophotometer | F-2700/F-2710

Hitachi's unique concave diffraction gratings combined with a low noise detection system result in an excellent signal-to-noise ratio (S/N ? 800 RMS, Raman band of water using 5nm slits), allowing measurement of fluorescein with sensitivity in the order of 1 x 10-12 mol/l. 

Hitachi fluorescence spectrophotometers offer a wide dynamic range of 6 or more orders of magnitude. This is the result from our unique circuit-processing technology where our fluorescence spectrophotometers switch gain automatically and allow measuring samples with low and high fluorescence intensity under the same conditions. This eliminates the need to prepare multiple calibration curves for a range of concentrations. 

The Hitachi F-2700/F-2710 fluorescence spectrophotometers's variable slit width works well for samples displaying sharp peaks or for samples with broad band peaks. 

The F-2700/F-2710 Fluorescence Spectrophotometers offer optional accessories for performing full range spectral correction for both the Excitation and Emission monochromators. This allows eliminating spectral distortions in your data resulting from the variation in power distribution from lamp to lamp, efficiency curves of the diffraction gratings and sensitivity of the detector. This is a desirable feature when publishing data or when comparing data from instrument to instrument. The picture below shows a measurement for NIST SRM 936. 

Wide range of accessories to meet your application needs from Biology, Environmental, Pharmaceutical QC, Teaching and Materials Research.

General Specifications
Depth 503 mm
Height343 mm
Width 600 mm
Power Requirements 100, 115, 220, 230 and 240 Volts AC, 50/60 Hz
Weight41 kg

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com