Peak Scientific - HALO - MP-AES

Manufactured by  Peak Scientific
Follow this Equipment

Designed as a dedicated solution for MP-AES instruments supplying the high purity nitrogen for plasma support gas an...

Designed as a dedicated solution for MP-AES instruments supplying the high purity nitrogen for plasma support gas and monochromator purge and air supply for POP gas or monochromator air purge, Halo produces 25 LPM of 99.5% or 10LPM of 99.95% pure nitrogen with a supporting air supply of up to 35 LPM. Fitted with an oxygen analyzer, Halo will alert when operating purity has been reached through a purity status indicating LED light.

Compact in size, Halo is a space-saving solution for the lab, freeing up valuable lab space whilst being far easier to transport for field research than bulky gas cylinders. Manufactured by Peak’s laboratory gas generation experts, Halo has been engineered to operate comfortably at high altitude with the most advanced gas generation technology to produce reliable, high purity nitrogen for your MP-AES application.

Active Questions & AnswersAsk a Question

There are no current Discussions

Nitrogen Service ProvidersView All (8)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of HALO - MP-AES
  • Nitrogen at 25 LPM at 99.5% purity or 10 LPM at 99.95%
  • Air supply at 35 LPM at -20°C ADP
  • O2 analyzer with LED light to indicate when operating purity is reached
  • Compact, mobile, space-saving solution
  • Latest generation, high specification compressor located in insulated chamber to minimize noise and vibration
  • Capable at operating in high altitude environments (up to 4,000m) without performance loss
  • Less than 30 minutes start-up to operating purity
  • Remove the hassle and safety concerns of ordering, transporting and changing out pressurized cylinders
  • Manufactured and tested in U.K. to highest spec., CE/FCC certified
  • 12-month fully comprehensive manufacturer’s warranty inclusive
General Specifications

There are no General Specifications available.

Additional Specifications

Generator Outlets 
Gas Type: Nitrogen, Air 
 
Gas Flow25L/min 
 
Outlet Pressure87psi 
 
Purity>99.5% 
 
Gas Type 2: Air 
 
Gas Flow35L/min 
 
Outlet Pressure87psi 
 
Electrical requirements 
Voltage230VAC 
 
Frequency50/60Hz 
 
Current10 amps 
 
General 
Size (HxWxD) mm765 x 570 x 880mm 
 
Size (HxWxD) Inches30.2 x 22.5 x 36.7 inches

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com