AMETEK - Jerome 651
Gold Film Fence-line Hydrogen Sulfide Monitoring System
Unattended
The 651 is designed for set-and-forget hydrogen sulfide monitoring, inside or out.
Flexible
A detachable hand-held hydrogen sulfide analyzer is contained within the unit for pinpointing a gas source.
Smart Alarms
Define alarm points that meet your needs and receive email notifications and warnings.
Wireless
Measurement data is transmitted wirelessly from 651 stations to the user’s PC.
Rugged
The 651 is housed in a steel casing, insulated, air conditioned, and ready for nearly any environment.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of Jerome 651
Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
Detachable Unit: Quickly and easily sweep an area for hydrogen sulfide hot spots with the detachable, hand-held Jerome 631-X hydrogen sulfide analyzer.
Perimeter Monitoring: Multiple 651 units can be linked to form a perimeter monitoring system to help locate the source of H2S and ensure safety and compliance.
Weather Station: An attached weather station monitors outside temperature as well as wind speed and direction for increased accuracy in pinpointing the source of odor contamination.
Data Transmission: Advanced data logging and radio telemetry capabilities make downloading data to a remote PC easy and convenient.
PC Software: Intuitive PC software with user selectable time-weighted average reporting and a site view tab give users a bird’s eye view of the monitoring system as a whole.
Programmable Alarms: The 651 comes with programmable alarms that automatically send email alerts if your H2S levels rise above your specified upper limit.
Temperature Controlled Interior: Resistive heating and thermoelectric cooling keep the interior of the 651 at a consistent temperature for increased accuracy.
Regulatory Compliance: The 651 is in active use by many regulatory agencies and landfill, water treatment and wastewater management facilities across the world.
General Specifications
There are no General Specifications available.
Additional Specifications
Detection Range: 3 ppb (0.003 ppm) to 50 ppm
Resolution: 0.001, 0.01, 0.1, and 1 ppm
Accuracy: ±0.005 ppm at 0.05 ppm ±0.05 ppm at 0.5 ppm ±0.5 ppm at 5 ppm ±2 ppm at 25 ppm
Sample Intervals: 1, 2, 5, 10, 15, 30, 60 or 120 minutes
Regeneration Intervals: 6, 12, 24 and 48 hours
Flow Rate: 150 mL/min
Operating Environment: -40 to +55°C, non-explosive, 0-100% relative humidity
Results: ppm, ppb
Data Storage Capacity: 50,000 readings
Power Requirements (651 Unit): 100-120 VAC, 50/60 Hz, 7 A or 210-240 VAC, 50/60 Hz, 4 A
Control Board Fuse: Fast-acting IEC 1.6 A 250 V, 5 mm x 20 mm
Case Construction: Polyester with insulation to reduce heat transfer
Battery (631-X Unit): Rechargeable NiCad 6 hour life, charges in 14 hours *only applicable when 631-X unit is not attached to 651
Estimated Sensor Life: 3 to 6 months depending on operating conditions
Display: 8 digit alphanumeric LCD
Output: Spectra Radio
Analog: 4-20 mA current loop
Dimensions: 26″ W x 25″ H x 9″ D (67 cm W x 64 cm H x 23 cm D)
Weight: 52 lbs. (24 kg)
Warranty: 1 year, factory parts and labor except for 631-X sensor