Yamato Scientific America - Yamato Forced Convection Oven Economy 150L 115V 12A 50/60Hz
Forced convection, constant temperature oven with simple operation functions.
Active Questions & AnswersAsk a Question
There are no current Discussions
Lab Ovens Service ProvidersView All (15)
Documents & Manuals
There are no Documents or Manuals available.
Features of Yamato Forced Convection Oven Economy 150L 115V 12A 50/60Hz
Performance and functions
Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes are possible, along with easy control capabilities * Settings can be made digitally using the dedicated operation menu keys or the up and down keys * Auto recovery after power failure, calibration offset and key-lock are possible through the auxiliary functions
Safety features * Self-diagnostic functions, Auto overheat prevention, Independent overheat prevention
General Specifications
There are no General Specifications available.
Additional Specifications
Circulation method : Forced air circulation
Operating temperature range : Room temp. +10~260°C
Temp. control accuracy : ±1°C (at 210°C)
Temp. distribution accuracy : ±2.5°C (at 210°C)
Max. temp. reaching time : ~90min (at room temp. +10°C~260°C)
Interior material : Stainless Steel
Exterior material : Cold rolled steel plate with melamine resin baking finish
Heat insulating material : Glass wool
Heater : SUS pipe heater 1.34kW
Fan type / Motor : Scirocco fan / Condenser type motor 10W
Cable port : 30 mm l.D.×1 pc. (right side)
Exhaust port : 30 mm l.D.×2 pcs.(the top)
Temp. controller : PlD control by microprocessor
Temp. setting method : Operation menu key and digital setting by UP/DOWN key
Temp display method :
Measurement temp. : Digital display by green LED
Setting temp. : Digital display by red LED
Timer : 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. (with time wait function)
Operation functions : Fixed temperature operation, Quick Auto-stop, Auto start, Auto stop
Additional functions : Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control : SSR control
Sensor : K-thermocouple
Safety device : Self diagnostic functions (Sensor trouble detection, Memory error, Measured temperature lower limit error, Measured temperature error), Auto overheat prevention, Independent overheat prevention.
Internal dimensions (W×D×H) : 600×500×500mm
External dimensions*(W×D×H) : 710×651×870mm
Internal capacity : 150L
Shelf plate with standard load : 15kg/piece
Shelf rest step number : 12 steps
Shelf rest pitch : 35mm
Power source 50/60Hz : AC115V 12A / AC220V 7A
Weight : ~65kg
Shelf plate : Stainless steel 2 pcs.
Shelf bracket : 4 pcs.