Thermo Scientific - Novex XCell4 Surelock Midi
Novex XCell4 Surelock Midi Electrophoresis
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of Novex XCell4 Surelock Midi
Easy to use Simple assembly (Figure 1) and operation for the ultimate in ease of use. A single SureLock™ actuator seals all gels while allowing for zero force insertion and foolproof positioning of the gels for sample loading.
Flexible Runs up to four Novex® midi-gels at once, while having the same approximate footprint as the Criterion™ Cell (Bio-Rad) which runs a maximum of only two gels.
Cost-saving efficiency Employs a passive cooling method, without the need for costly, external accessories. Since all you will need for electrophoresis are the XCell apparatus and a power supply, you'll save money on additional water baths, pumps, and stir plates; requires 25% less running buffer per gel than the Criterion™ Cell (340 ml vs. 460 ml).
General Specifications
Depth | 7.5 in |
Height | 6.3 in |
Tray Capacity | 4 |
Width | 8.35 in |
Buffer Volume | 175 ml in each upper buffer chamber, 700 mL in lower buffer chamber with 4 gels |
Electropheresis Type | Gel |
Gel Size | 13 x 8.3 cm |
Gel Thickness | 1 mm |
Orientation (H/V) | Vertical |
Additional Specifications
Electrical Limits:
600 VDC or 200 Watts
The XCell4 SureLock™ Midi-Cell is impervious to alcohol, but not compatible with chlorinated hydrocarbons (e.g. chloroform), aromatic hydrocarbons (e.g. toluene, benzene) or acetone.
Gel Specifications
The XCell4 SureLock™ Midi-Cell is compatible with NuPAGE® Novex® and
Tris-Glycine Midi precast gels.
Sample Well Capacity
The maximum recommended sample volume/well for different Novex® Midi precast gels is listed below.
Gel thickness:
1.0 mm
12+2 well: 45 uL, 15 uL (marker)
20 well: 25 uL
26 well: 15 uL