Buehler - SimpliMet 3000 Mounting Press
No Documents
This versatile compression mounting press is designed for users with high variety in the lab.
Ideal for labs with multiple protocols and different compression mount types. Store and recall up to 5 different programs, reduce complexity and eliminate errors. Flexibility for high variability labs Highly varying samples sizes can be optimized by selecting different mold sizes. Save on mounting media and improve mount quality
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & Manuals
There are no Documents or Manuals available.
Features of SimpliMet 3000 Mounting Press
Reduce Complexity with programmability
- Deal for labs with multiple protocols and different mount types. * Store and recall up to 5 different programs, reduce complexity and eliminate errors* Flexibility for high variability labs * Highly varying samples sizes can be optimized by selecting different mold sizes. Save on mounting media and improve mount quality
General Specifications
There are no General Specifications available.
Additional Specifications
Specifications
Operation Automatic electro-hydraulic
Power Source 85-264VAC, 50/60Hz, 1 phase
Molding Pressure 1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature 120 - 360°F [50 - 80°C] in 20°F [10°C] increments
Heating Power 1500Watt @ 115/230VAC
Heating Time 0 - 20 minutes in 10 second increments
Cooling Time 0 - 30 minutes in 10 second increments
Mold Type Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type Insluated bayonet with piston indent
Mold Diameters 1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad Controls On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure Imperial or Metric
Water Flow Rate 0.5gal/min [2?/min] minimum
Water Pressure 45-75psi [3-5bar]
Control Voltage 24VDC
Method Programmability 4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure 0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic Function Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion
Compliance In accordance with EC Directives