Carbolite - Wire Wound Single Zone Tube Furnace - MTF

Manufactured by  Carbolite
Follow this Equipment

The MTF wire wound tube furnaces, like the larger diameter CTF range use a wire element that is wound directly onto a fixed integral ceramic work tube

The MTF wire wound tube furnaces, like the larger diameter CTF range use a wire element that is wound directly onto a fixed integral ceramic work tube. 
 
This simple and economical design provides a furnace which can be used without the need to purchase an accessory work tube.  
 
However, should vacuum or a modified atmosphere be required, it is necessary to use a separate slide-in work tube in order to provide the required length needed to fit end seals. Similarly, in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required. 
 
The use of an additional slide-in work tube protects the integral work tube and heating element.
Active Questions & AnswersAsk a Question

There are no current Discussions

Lab Furnaces Service ProvidersView All (8)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Wire Wound Single Zone Tube Furnace - MTF

Standard features 

  • 1000°C or 1200°C maximum operating temperature * 15 mm, 25 mm or 38 mm inner diameters * 130 mm, 250 mm, 400 mm or 850 mm heated length * Integral wirewound work tube * Carbolite Gero 301 controller, with single ramp to set-point & process timer * Delayed start / process timer function as standard * Horizontal configuration mounted on control module 

    Options (specify these at time of order)   * Over-temperature protection (recommended to protect valuable contents & for unattended operation) * A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere * Insulation plugs & radiation shields to prevent heat loss & improve uniformity * Alternative mounting options are available * A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications

General Specifications

There are no General Specifications available.

Additional Specifications

MTF 10/15/130 
 
Max temp (°C) 1000 
Max continuous operating temp (°C) 900 
Dimensions: Fixed tube inner diameter (mm) 15 
Dimensions: Heated tube length (mm) 130 
 
 
MTF 10/25/130 
 
Max temp (°C) 1000 
Max continuous operating temp (°C) 900 
Dimensions: Fixed tube inner diameter (mm) 25 
Dimensions: Heated tube length (mm) 130 
 
 
MTF 12/25/250 
 
Max temp (°C) 1200 
Max continuous operating temp (°C) 1100 
Dimensions: Fixed tube inner diameter (mm) 25 
Dimensions: Heated tube length (mm) 250 
 
 
MTF 12/38/250 
 
Max temp (°C) 1200 
Max continuous operating temp (°C) 1100 
Dimensions: Fixed tube inner diameter (mm) 38 
Dimensions: Heated tube length (mm) 250 
 
 
MTF 12/25/400 
 
Max temp (°C) 1200 
Max continuous operating temp (°C) 1100 
Dimensions: Fixed tube inner diameter (mm) 25 
Dimensions: Heated tube length (mm) 400 
 
 
MTF 12/38/400 
 
Max temp (°C) 1200 
Max continuous operating temp (°C) 1100 
Dimensions: Fixed tube inner diameter (mm) 38 
Dimensions: Heated tube length (mm) 400 
 
 
MTF 12/38/850 
 
Max temp (°C) 1200 
Max continuous operating temp (°C) 1100 
Dimensions: Fixed tube inner diameter (mm) 38 
Dimensions: Heated tube length (mm) 850

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com