BioTek - Epoch
Multi-Volume Spectrophotometer System
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Asked byLWAdmin
UV/VIS Spectrophotometers Service ProvidersView All (32)
Documents & Manuals
There are no Documents or Manuals available.
Features of Epoch
- 200 nm to 999 nm in 1 nm increments
- 6- to 384- well plate reading capability
- Gen5™ Microplate Data Analysis Software included
- Automated pathlength correction for direct quantification
- Integrated detector & electronics for low-noise measurements
- Xenon flash lamp to last the instrument's lifetime
- Robust housing design for longevity even under heavy usage
- Take3™ Multi-Volume Plate compatibility for low volume nucleic acid quantification, BioCell or cuvette measurements
- Wavelength scanning, end point, kinetic and well area scanning
General Specifications
Bandwidth | 5 nm |
Depth | 12.5 in |
Height | 7.7 in |
Width | 12 in |
Power Requirements | 100 - 240 VAC @ 50- 60 Hz. External supply. Consumption <40W. |
Weight | 15 lbs |
Wavelength Range | 200 to 999 nm |
Light Source | Xenon flash lamp |
Additional Specifications
Read method: Absorbance - Endpoint, kinetic, spectral scan, well area scan
Microplate types: 6-, 12-, 24-, 48-, 96-, and 384-well microplates with standard 128 mm x 86 mm footprint and maximum height of 0.8". Take3 Multi-Volume Plate compatible
Software: Comes with Gen5. Compatible with all editions of Gen5
Dynamic range: 0 to 4.0 OD
Resolution: 0.0001
Monochromator wavelength accuracy: +/- 2 nm
Monochromator wavelength repeatability: +/- 0.2 nm
OD accuracy: 0 to 2 OD: +/-1% +/-0.010 OD
2 to 2.5 OD: +/-3% +/-0.010 OD
OD linearity: 0 to 2 OD: +/-1% +/-0.010 OD
2 to 2.5 OD: +/-3% +/-0.010 OD
OD repeatability: 0 to 2 OD: +/-1% +/-0.005 OD
2 to 2.5 OD: +/-3% +/-0.005 OD
Reading speed:
Normal: 49 s
Rapid: 38 s
Sweep: 15 s
Regulatory: For in vitro diagnostic use. All BioTek microplate instrumentation is CE and ETL marked. For details on approvals and standards compliance, please contact BioTek. Compliance: EN 61326-1:2006;EN61326-2-6:2006;EN61000-4-2; EN61000-4-3, EN61000-4-4; EN61000-4-5; EN61000-4-6; EN61000-4-11