Rudolph Research Analytical - Autopol VII
No Documents
High Accuracy Polarimeter with Industry Leading Automated Sample Loading.
The Industry Standard Polarimeter
The Autopol® VII combines a pharmaceutical level Polarimeter with fully automated sample loading capability, a perfect answer for high throughput labs that demand accuracy and, reproducibility, combined with versatile sample loading, cell cleaning, rinsing, and drying.
The Autopol® VII has the validation tools, features, and reputation to satisfy today’s global pharmaceutical companies, including: instrument level 21CFR Part 11 compliance, NIST traceable validation and a global list of satisfied customers who praise the Autopol’s® quality, accuracy and reproducibility.
The Autopol® VII offers Automated NIST Traceable 3 point validation combined with fully Automatic TempTrolTM Temperature Control
The Autopol® VII has built-in NIST Traceable Quartz plates to automatically perform a 3 rotation validation on the Autopol VII. To validate the instrument simply press a button to begin the validation routine. Using the on-board quartz plate standards the instrument will perform and record the results of a full 3 point calibration at all wavelengths at the correct temperature.
Active Questions & AnswersAsk a Question
There are no current Discussions
Polarimeters Service ProvidersView All (3)
Documents & Manuals
There are no Documents or Manuals available.
Features of Autopol VII
Automated filling, cleaning, and rinsing
The Autopol VII with integrated sample loading can be configured to automate a wide range of sample viscosities. Perfect for high throughput laboratories looking to increase productivity. By automating sample loading user time is saved. The method ensures samples are loaded properly and the correct cleaning and rinsing sequence is performed. The Autopol® VII with integrated automated sample loading is ideal for busy Pharmaceutical laboratories where sample handling is discouraged.
Sample Viscosity:
• Samples up to 36,000 mPa-s (cP)
• Sample Volume Requirements: 3.5ml typical, optional to 1.5ml
Rack Sample Capacity:
• 50 – 16 x 100mm Test tubes. 70 – 13 x 100 mm, or optionally dozens of sample vial configurations and capacities.
Cleaning Cycle:
• 1:45 minutes nominal – Time varies by application
• Full Measurement and Cleaning Cycle: 2:30 minutes nominal – Time varies by application
General Specifications
There are no General Specifications available.
Additional Specifications
Measuring Mode:
Optical Rotation, Specific Rotation, Concentration & User-defined Scales
Measuring Scale:
Degrees Arc, % Concentration
Measuring Range:
±89.9° Arc Optical Rotation, ±999.99° Arc Specific Rotation and 0-99.9% Concentration
Resolution:
0.001° Arc Optical Rotation, 0.001% Concentration, 0.001° Specific Rotation
Reproducibility:
0.002° Arc
Standard Model Accuracy:
0.002° up to 1°, 0.2% up to 5°, 0.01° above 5°
AP Model Accuracy:
(546nm and 589nm): ±0.002° Arc over ±89.9°?Arc. Accuracy for other wavelengths is the same as the standard model.
Prism:
Glan Thompson calcite quartz
Optical Wavelengths:
365nm, 405nm, 436nm, 546nm, 589nm, 633nm (other wavelengths available)
Wavelength Selection:
Automatic by push-button
TempTrol™ Range:
Automatic Electronic Heating & Cooling 15°-35°C
TempTrol™ Accuracy:
±0.2°C
Temp. Probe Range:
10°-40°C
Temp. Probe Accuracy:
±0.1°C
Acid Resistance:
Hastelloy™ measurement cell and Silco Steel™ sample chamber (optional)
Measurement Time:
4°/sec. slew rate and 5 sec. nominal settling time
Light Source:
Tungsten-halogen 6V, 20W, avg. 2,000 hour life
Sample Chamber:
Accepts sample tubes up to 200mm
Data Storage/Internal Memory:
Multimedia Card and/or Secure Digital Card
Communication Interface:
Two RS232 serial ports, one parallel printer port and one auxiliary port
Calibration:
Automatic calibration by push-button
Display:
7.5cm x 10cm graphics LCD, 320 x 240 dots cold fluorescent back lit
User Interface:
Touchscreen
Automatic Sensitivity Control:
Measures samples with transmittance as low as 0.01% (up to O.D. 4.0)
Input Power:
100-240VAC, 50/60 Hz
Operating Dimensions:
35”W x 10.5”H x 17”D 890mm W x 267mm H x 432mm D
Shipping Dimensions:
43”W x 26”H x 23”D 1,025mm W x 625mm H x 625mm D
Operating Weight:
85 lbs. (39kg)
Shipping Weight:
115 lbs. (52kg)