PHCBi - Cell-IQ™ MCO-170AICUVDL-PA

Manufactured by  PHCBi
Follow this Equipment

Triple Decontamination Protection>

The MCO-170AICUVDL-PA automatic CO2 incubator is designed fo...

Triple Decontamination Protection

The MCO-170AICUVDL-PA automatic CO2 incubator is designed for use in medical and government research, pharmaceutical and biotech applications. This incubator includes three methods of protection against cell culture contamination. First, interior chamber surfaces and components are constructed of inCu-saFe copper enriched stainless steel alloy with inherent germicidal properties. Second, the SafeCell UV lamp, provides both passive and active contamination control by scrubbing and decontaminating circulated chamber air without affecting cell cultures in situ. Finally, a manually initiated dry heat sterilization cycle provides a 180°C (355° F) decontamination process without the need to remove incubator chamber components.

Optimal Cell Culture Environment for Repeatable Results

This incubator's heater jacket system and dual-wave infrared CO2 sensor for precise CO2 atmosphere and fast recovery after door openings provide the optimal growth environment to meet your cell culture needs.

Active Questions & AnswersAsk a Question

There are no current Discussions

CO2 Incubator Service ProvidersView All (28)

Request Support
Features of Cell-IQ™ MCO-170AICUVDL-PA
  • Uniform Consistent Environment
  • Rapid CO2 Recovery with Dual-Wave Infrared (IR) Sensor
  • 180°C Dry Heat Sterilization - Total 11 Hour Cycle
  • Decontamination with inCu-saFe® and SafeCell™ UV
  • Condensation Management System
  • Microprocessor Controller
  • Color LCD Touchscreen
  • USB Log Function for Data Transfer and Storage
General Specifications
Depth 24.4 in
Temperature Uniformity0.25 °C
Height35.6 in
Internal Depth 20.6 in
Internal Height 26.2 in
Width 29.7 in
Internal Width 19.3 in
Power Requirements Max. 376 W
Chamber Volume5.8 cu. ft.
CO2 SensorInfrared (IR)
CO2 Range0 to 2 %
Weight176 lbs
Incubator Orientation Floor Standing
Additional Specifications

DATA ACQUISITION    
USA data download   
   
INNER DOOR    
One - tempered glass - field reversible   
   
SHELVES    
4 copper enriched, stainless steel alloy (inCu-saFe)   
   
ACCESS PORT    
One - 1.2" (30 mm) located in the rear upper left   
   
INSULATION    
Melamine resin foam   
   
AIR FILTER    
0.3 um, Efficiency: 99.97 % or higher   
   
UV LAMP    
4W x 1 (ozone-free emission)   
   
TEMPERATURE CONTROL RANGE    
+ 5°C Above ambient to +50°C (ambient temperature: 5°C to 35°C)   
   
CO2 CONTROLLER    
Proportional   
   
CO2 GAS CONNECTION    
0.157 inch to 0.36 inch (4 mm to 6 mm) diameter tube can be connected   
   
CO2 GAS PRESSURE    
0.03 MPa(G) (0.3kgf/cm2(G),4.3 psi(G))   
   
CO2 VARIATION    
±0.15% (ambient temperature: 23ºC, setting: 37ºC, CO2: 5%, no load)   
   
CO2 SENSOR TYPE    
Dual-wave infrared (IR)   
   
DATA OUTPUT    
USB   
   
DECONTAMINATION METHODS    
H2O2 Vapor Decontamination   
   
CONTAMINATION CONTROLS    
Standard 24 hr full chamber UV decontamination (SafeCell Ultraviolet Light) and Copper Alloy Interior Surface (inCu-saFe)   
   
DECONTAMINATION CYCLE TIME
   
< 3.0 Hours   
   
DISPLAY    
LCD color touchscreen - readable in 0.1° increments   
   
HEATING SYSTEM    
Direct Heat and Air Jacket System   
   
HUMIDIFYING SYSTEM
   
Natural evaporation with humidifying pan, 95 %R.H.±5 %R.H.

NewsView All Articles

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com