More Capacity 

• Completely redesigned chamber with rear docking and no exposed heating elements enables more space for baskets and inserts. * Ability to clean 98 pipettes in lower level in combination with 32 flasks * Almost double the capacity for 50 - 100 ml round bottomed flasks and bottles compared to previous models * 19 new baskets, modules and inserts generate hundreds of loading combinations * Three levels of cleaning for smaller items 

  Greater Flexibility * A new, modular basket system provides maximum flexibility and intuitive operation as modules can be used in different combinations and can easily be reconfigured. * Wide range of combination options guarantees flexibility in catering for different loads. * Reduction in number of load carriers needed saves both on investments and storage space. 

  Improved Efficiency * New variable-speed pump improves cleaning capability and allows for new programming options. * Pump speed increases during Injection Plus program for better cleaning of narrow neck items and pump speed lowers for rinses. * Spray arm monitoring detects blockages, excessive foaming and alerts operator. No time is lost due to improper loading and rewashing.  * Newly improved drying programs and an aerosol steam condenser enhance the drying process. 

  The Power of Variability  The heart and soul of the new generation Flex Series Washers is the variable-speed pump with integrated heater elements. The pump speeds up and slows down according to programming, increasing speed to provide a more powerful pressure for injection cleaning and lowering speed for less intense functions such as rinsing. The result: Improved energy efficiency and better cleaning. * The pump speeds to up 3,400 rpm/132 gallons per minute during Injection Plus to provide better cleaning of pipettes and narrow neck glassware. * The pump speed lowers for rinsing and to provide uniform wetting of all surfaces. * Direct heating of water within the pump saves time. No exposed heating elements reduces damage of plastics. * Modulating spray pressure provides maximum water and energy efficiency. 

  Redesigned Chamber * No exposed heating elements removes potential of soil buildup and eliminates the risk of damage to plastics. * High grade polished stainless steel surfaces and seams are laser welded to ensure a crevice-free corrosion-resistant chamber. * The improved cabinet space allows for 128 flasks or 98 pipettes and 32 flasks to be cleaned in one load in the new modular loading system—This represents an almost 50% increase from the G78 series washer.  

  Rear Basket Docking System * The relocation of the docking system to the rear of the chamber guarantees a more streamlined water and air circuit and allows for improved load capacity. * Shorter circulation paths help minimize pressure loss and reduction in water temperature. * When not in use, automatically self-sealing valves ensure uniformly high spray pressure. 

  Improved Spray Arm Design * Knife edge jet pattern spraying ensures effective removal of debris, uniform wetting and cleaning while eliminating water reflections in the spray curtain. * New arrangement of nozzles on spray arms provides full spray jet coverage. * Advanced sensors monitor spray arm blockages and pressure and alert the user of items blocking spray arms or excessive foaming, which can result in pressure loss. * Spray pressure sensor also confirms that modular basket is properly connected. 

  Streamlined Controller Design * The new control panel combines the door handle and control panel with a single flush stainless steel surface with simple touch controls. * Three line text display and intuitive interface * Programs for all disciplines and two empty slots for user-specific programs * Direct access buttons for routine tasks 

  Improved Ergonomics * The patented salt container is located inside the door and is easily accessible (holds approximately 4 lbs of salt). * AutoClose: gently press against the door to close it and it locks automatically. Minimum effort is required to reliably close and lock the door. 

  New Improved Drying * EcoDry: The door on the PG 8583 automatically opens at the end of a program when the cabinet temperature has dropped below 158° F/70° C. This allows moisture-laden air to be released in order to dry and cool down glassware faster.  * DryPlus: HEPA-filtered forced-air drying is provided on the PG 8593 and PG 8583 CD - a perfect solution for intricate and narrow-lumened laboratory glassware and equipment. * With DryPlus, an upstream Class H13 HEPA filter ensures the reliable removal of particles from the air taken in for drying. * New aerosol steam condenser with larger cross section enables high fluid flow rates and improves drying performance.