Phase II - Ultrasonic Portable Hardness Tester w/Output
Manufactured by Phase II
The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of...
The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections.
PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument.
PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument.
Active Questions & AnswersAsk a Question
There are no current Discussions
Hardness Testers Service ProvidersView All (2)
Documents & Manuals
There are no Documents or Manuals available.
Features of Ultrasonic Portable Hardness Tester w/Output
- Easy To Read Menu Operation * Large LCD Display w/ Back Light * USB Interface * Automatic Reading to All scales including Brinell, Rockwell, Superficial Rockwell & Vickers * Automatic Mean Value * Data Archive Capacity
General Specifications
There are no General Specifications available.
Series Modals
Phase II - MET-U1A
[+] View Model SpecificationsDepth | 43 mm |
Height | 180 mm |
Width | 80 mm |
Weight | 720 g |
Additional Model Specifications | The MET-U1A portable hardness tester meets ASTM A1038-10 specifications. |
Phase II - MET-U1A50
[+] View Model SpecificationsDepth | 43 mm |
Height | 180 mm |
Width | 80 mm |
Weight | 720 g |
Additional Model Specifications |