The PAT700 TOC analyzer fully complies with all global pharmacopeias (USP, EP, JP) requirements. Each sample is fully oxidized guaranteeing the most accurate TOC result that follows EP2.2.44 guidelines. Production uptime is assured with the PAT700 main and standby dual UV lamp design, making it the ideal choice for on-line TOC release. Save time and money - the PAT700 can be installed online and run up to 4 grab samples offline.
Have confidence in the data - assured with UV Detect, excursion alarming, and fully traceable calibration Implement the FDA PAT initiative for on-line release for TOC and Conductivity eliminating time consuming and costly laboratory analysis. Reduce the risk of product recall and speed up water loop troublshooting when an excursion alarm occurs The PAT700 internally captures two samples and then re-analyzes the first sample to validate the excursion alarm and saves the second sample for further root-cause analysis. Confirm production vessels are clean and ready to go on-line faster with Clean-in-Place (CIP) analysis The PAT700 clean-in-place analysis maximizes production up-time by providing immediate on-line results for both TOC and conductivity. Providing instant on-line verification that your production vessel is ready for production changeover. Save hours and expand laboratory throughput with the PAT700 36 bottle auto-sampler Using the ASX-7200 auto-sampler allows laboratory users to set up 36 bottles for TOC analysis and walk away. Using the PAT700 there is no requirement for costly reagents or carrier gases.