1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Incubators
    4.  / 
  4. CO2 Incubator
    5.  / 
  5. PHCBi - MCO-18ACL/MCO-18ACUVL

PHCBi - MCO-18ACL/MCO-18ACUVL

Manufactured by  PHCBi
Follow this Equipment

CytoGROW Optimal CO2 Incubators

Ideal for research and clinical microbiology, the Panasonic CytoGROW GLP CO2 incubator offers a high performance solution for mainstream cell culture applications in the research and clinical environment where precise control and contamination resistance is critical.
Active Questions & AnswersAsk a Question

There are no current Discussions

CO2 Incubator Service ProvidersView All (28)

Request Support
Features of MCO-18ACL/MCO-18ACUVL
  • Wide Range of Applications
  • InCu-saFe® Copper Stainless Steel Alloy
  • SafeCell UV Protection (for UV Models)
  • Direct Heat and Air Jacket System
  • Integrated Microprocessor Control
General Specifications
Depth 28 in
Height35.4 in
Internal Depth 20.6 in
Internal Height 26.2 in
Width 24.4 in
Internal Width 19.3 in
Chamber Volume170 L
Weight205 lbs
Additional Specifications

SHELVES     
Maximum 15/chamber, 5 supplied standard; 22.8 X17.7X 0.5 / 579 X 450X 13mm (wXf-bX h) lip, 15.4 lbs./ 7 kg. capacity     
TEMPERATURE CONTROL RANGE     
+5ºC above ambient to 50°C     
TEMPERATURE CONTROL UNIFORMITY DEVIATION      
±0.25°C (in 25°C ambient, setting 37°C, 5% CO2, no load     
CO2 CONTROL RANGE AND DEVIATION     
0 to 20% ±0.15% (in 25°C ambient, setting 37°C, 5% CO2, no load)     
INTERIOR HUMIDITY     
95% RH at 37°C through evaporation via DHA heating system, optional reflective/deflective optical low-water sensor     
TEMPERATURE AND CO2 CONTROL      
LED., Setpoint resolution 0.1% and 0.1°C     
OUTER DOOR     
Reversible     
ACCESS PORT     
Single, 1.18/30 mm with silicone (non-VOC) stoppers (upper-left rear) 
 
CONTAMINATION CONTROL  
MCO-18ACL  
inCu-saFe®  
MCO-18ACUVL  
inCu-saFe® / SafeCell UV / Active Background Contamination Control

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com