Fine and powerful comminution with maximum flexibility!     
     
Variable rotational speed for optimal adjustment of the cutting speed to your sample material     
The NEW Universal Cutting Mills from FRITSCH are ideal for size-reduction for a wide range of different materials due to variable adjustment of the rotational speed of the rotor, various knife geometries, replaceable blades, practical sieve cassettes and that with an unmatched ease of cleaning.     
     
Variable 300-3000 rpm for fine comminution     
The high-speed Universal Cutting Mill PULVERISETTE 19 comminutes up to 60 l/h of soft to medium-hard sample materials and fibrous materials at a torque of up to 30 Nm with reliable reproducible results. The great advantage: The variable rotational speed adjustment in increments of ten between 300 and 3000 rpm enables fine tuning of the comminution process for each sample within a very wide range of applications.     
     
Variable 50-700 rpm for powerful comminution     
The low-speed Universal Cutting Mill PULVERISETTE 19 with variable rotational speed adjustment between 50-700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution of hard, tough-elastic samples and small sample quantities. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided.     
     
Especially for analytical sector, food and pharmaceutical industry      
The Universal Cutting Mill PULVERISETTE 19 is also available in both variable rotational speed versions in a corrosion-resistant stainless steel 316L version. All materials have an increased resistance to alkalis and acids and are conform to the guidelines of the food and pharmaceutical industry.