Malvern Panalytical - D11 Inline eductor (8mm)

Manufactured by  Malvern Panalytical
Follow this Equipment

Easily slotted into a Parsum probe the D11 in-line eductor uses a single air supply introduced via three separate...

Easily slotted into a Parsum probe the D11 in-line eductor uses a single air supply introduced via three separate connections to apply suction, acceleration and thinning to the sample. It has an 8 mm aperture for sample flow and requires an 85 mm free opening for installation. A back flush function prevents material build-up, even for powders prone to adherence.   
  
Active Questions & AnswersAsk a Question

There are no current Discussions

Sample Preparation Supplies Service ProvidersView All (3)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of D11 Inline eductor (8mm)
  • Back flush function to prevent build-up for long-term trouble-free operation.  * Triple air supply to ensure sample is robustly presented in an optimal state for measurement.
General Specifications

There are no General Specifications available.

Additional Specifications

Pulsation   
Yes (to No. 3 only)   
Particle size   
1000 to 4000µm   
Dv(50)   
50 to 1200µm%    
Fines in product   
Low to medium   
Applications   
Coarse particles and high solids loadings   
Air flow l/min   
1 = 16 2 = 21 3 = 8 Internal = 8   
Temperature   
-10°C – 100°C   
Humidity   
35% - 80% non-condensing

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com