BioCold - Warm Room
Manufactured by BioCold
No Documents
BioCold doesn't just build cold rooms. Many of our rooms today are designed as incubators, or as wide-range rooms for...
BioCold doesn't just build cold rooms. Many of our rooms today are designed as incubators, or as wide-range rooms for operation at a variety of temperature and humidity conditions.
For rooms operating at ambient temperatures and above, BioCold uses a refrigeration reheat system, providing a small, constant refrigeration load to offset the heat generated within the room by fan motors and other system components. Resistive heaters are then pulsed to control room temperature within a few tenths of a degree, using microprocessor-based PID controls.
Many warm rooms also require elevated humidity. BioCold's ultrasonic vapor generator provides a finitely-controlled humidifier which can be autotuned for straightline temperature control. The water vapor is injected directly into the air handler, and dispersed uniformly throughout the room.
For rooms operating at ambient temperatures and above, BioCold uses a refrigeration reheat system, providing a small, constant refrigeration load to offset the heat generated within the room by fan motors and other system components. Resistive heaters are then pulsed to control room temperature within a few tenths of a degree, using microprocessor-based PID controls.
Many warm rooms also require elevated humidity. BioCold's ultrasonic vapor generator provides a finitely-controlled humidifier which can be autotuned for straightline temperature control. The water vapor is injected directly into the air handler, and dispersed uniformly throughout the room.
Active Questions & AnswersAsk a Question
There are no current Discussions
Environmental Chambers Service ProvidersView All (20)
Documents & Manuals
There are no Documents or Manuals available.
Features of Warm Room
BioCold Warm Room Features
- Simple, easy-to-use, easy-to-service control systems and wiring circuits. BioCold temperature controllers are "works in a drawer" and can be easily replaced without disconnecting a single wire. PLCs and printed circuit boards have their purpose, but only add unnecessary complexity to a standard cold * GFCI circuit breakers mounted in the control console load center provide ground fault protection for all receptacles within the * Umbrella airflow air handling system eliminates the need for a drop grid ceiling, eliminating a common, difficult-to-clean, area of dust and mold spore * 2" thick cam-locked floors, available with foamed-in-place diamond tread finish, offer 20" long ADA ramps and durable nonslip working floor surface supporting up to 600psf without * Absolutely no wood in wall or floor panels. Particularly in incubator rooms, wood absorbs water, swells, and rots over time, and should be avoided. * Optional Honeywell chart recorders, Dickson data loggers, and RS485 modbus communications to building automation or monitoring systems
General Specifications
There are no General Specifications available.