Baker - IsoGARD Class III

Manufactured by  Baker
Follow this Equipment

The Baker IsoGARD® series Class III glovebox is designed for research involving agents assigned to BSL-3 and -4...

The Baker IsoGARD® series Class III glovebox is designed for research involving agents assigned to BSL-3 and -4 facilities, or where a very high level of containment is required because of the nature of the protocol. The cabinets are designed to allow safe handling of hazardous microbiological agents or pharmaceutical potent compounds under contained conditions. The IsoGARD® meets the very stringent performance, construction and leak-testing requirements of Class III biological safety cabinetry, as defined by the U.S. Federal Register.
Active Questions & AnswersAsk a Question

There are no current Discussions

Glove Boxes Service ProvidersView All (2)

Request Support
Features of IsoGARD Class III

The IsoGARD® is particularly wellsuited for aerosolization studies, vaccine research, handling of sterile potent pharmaceutical compounds and inspection of unknown suspected terrorism samples.    

  • The IsoGARD® is designed in three standard models that offer two-, three- and four-glove primary working chambers along with a host of options that allow users to tailor a cabinet to meet most standard requirements.     
  • The IsoGARD® glovebox includes an integral, full-size HEPA-filtered pass-thru chamber with a unique space saver front-opening glass panel door that allows users to introduce samples into the main working chamber with ease. A builtin gloveport allows the user to manually wipe down and clean the interior of the pass-thru as well as aid in the manipulation of samples.     
  • IsoGARD® units are equipped with full-coverage, ceiling-mounted supply HEPA filters to ensure an ISO Class 4 (FS209E Class10) operating environment, as well as easily removable, specially designed cartridge-style exhaust HEPA filters to provide environmental protection.     
  • Cabinets operate continually under a negative 0.5 inch water column pressure to ensure continued personnel protection in the event of a glove or seal failure.     
  • Baker’s Class III gloveboxes are built to the highest leak-tightness specifications to ensure the safety of laboratory workers. Each IsoGARD® is factory-tested using a Class III Sulfur Hexafluoride (or equivalent Helium) leak test prior to shipping. A leak rate no greater than 1 x 10-7 cc/sec (based on 1% concentration, SF6 or Helium) at 3 inches positive water column pressure is the acceptance criterion.
General Specifications

There are no General Specifications available.

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com