Home > All Categories > Basic Laboratory > Environmental Chambers > ESPEC - TSE Small Thermal Shock Chambers
Advertisement

ESPEC - TSE Small Thermal Shock Chambers
Manufactured by ESPEC

ESPEC - TSE Small Thermal Shock Chambers
DESCRIPTION
Simple to install and operate!

Did you think that getting a thermal shock chamber was too expensive, required special utilities, and half your lab-space? The TSE-11 thermal shock chamber is the solution. Only 26 inches wide, the TSE-11 transfers product loads between cold and hot zones with a temperature range of -65°C to 200°C. • Meets strict Mil-Std 883 1010.7/1010.8 thermal cycling requirements with 4 kg. (8 lbs.)   • Also can be used for IEC 61300-2-47, JEDEC JESD47E, JESD22-A104, and others   • Touch-screen operation is very easy, yet full-featured   • The cold zone is cooled by refrigeration. No need for tanks of liquid nitrogen (or cooling water supply)   • The only utility required is 208V power   • Super quiet operation of less than 60dB

FEATURES

Chamber Design Features: • Vertical-lift thermal shock chamber with separate hot and cold temperature zones • Direct-drive system for reliable transfer between zones (maximum load 17 lb.) • Compact design with integrated mechanical refrigeration • Exterior is painted ESPEC grayish-violet, interior is stainless steel • Two specimen baskets • Tube for cables to test load, 2" diameter • Specimen power supply terminal • Includes caster and leveling pads for easy movement • Designed for performance with maximum load (lighter loads need additional mass for proper performance) Refrigeration and Plenum: • Refrigeration maintains user-set low temperature in cold zone • Two sirocco blower motors circulate the air (one per zone) • Non-CFC cascade refrigeration system using 2-hp compressors • Quiet operation with sound levels below 60dB ESPEC's Exclusive P-310 Programmer: • User-friendly touch-screen operation with 7" color display • The trend-graph display shows a record of setpoints and actual values • Cycle-time reduction function can automatically advance to the next step • 20 user-definable programs can be saved with alphanumeric names • System alarms are stored in memory for historical review • Built-in timer functions allow the chamber to be started or shut down automatically • New: Ethernet with browser-based access is standard, plus USB

SPECIFICATIONS
Depth 9.1 in
Height5.8 in
Width 12.5 in
Advertisement
QUESTIONS & ANSWERS
Be the first to ask a question about this equipment

Ask a Question

Ask anything about
ESPEC - TSE Small Thermal Shock Chambers
Advertisement