Gilson - Automated GX-271 GPC Clean-up System

Manufactured by  Gilson
Follow this Equipment

Maximize your automated sample prep clean-up prior to GC, GC/MS, HPLC, and LC/MS analysis.

The Automated GX-271 GPC Clean-up System provides an affordable solution for laboratories performing residue analysis of complex matrices such as fatty foods, soils, sludge, animal and plant tissue.     
     
Automate post-extraction clean-up of interfering substances from environmental samples, food products, and animal tissue by Gel Permeation Chromatography (GPC) prior to analysis by GC, GC/MS, HPLC, or LC/MS. Failure to remove these interfering compounds can cause poor analytical results, shorten column life, and increase analytical downtime.
Active Questions & AnswersAsk a Question

There are no current Discussions

Need Equipment Support?

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Automated GX-271 GPC Clean-up System
  • The system features a Direct Injection Module and a fraction collection valve located on the Z-arm, increasing efficiency by reducing sample carryover and post valve dead volume.     * The Automated GPC system is controlled with TRILUTION® LC Software, a user-friendly, easy-to-use, flexible program that was specifically designed to meet the laboratory needs. The software features pre-programmed methods specific to GPC post-extraction clean-up processes.     * Gilson GPC Clean-up Systems meet clean-up guidelines set forth by the USEPA, USFDA, USDA, USGS, ISO, CFIA, AOAC International and European Union (EN 1528, EN 12393, S19) requirements.
General Specifications

There are no General Specifications available.

Additional Specifications

Pump:      
Reciprocating pump with single-piston interchangeable head, constant stroke and fast refill motion, internal pulse dampener and pressure feedback     
Accuracy:      
< ± 1%     
Repeatability:     
< 1%     
Flow Rate:     
10 uL/min to 10 mL/min     
Dimensions (w x d x h):      
33 x 33 x 15 cm (13 x 13 x 6 in)     
Maximum Pressure:      
4000 psi (276 bar)     
Injection Volume:      
GX-271 Liquid Handler/Injector: 20 uL to 5 mL (5 mL standard)     
Vertical Punch Strength:      
3.2 kg (7 lb) for septum piercing     
Syringe Pump:      
402 Single Syringe Pump with 10 mL syringe     
Sample Rack Capacity Options:      
13 x 100 mm tubes, 16 x 100 mm tubes and other options available upon request     
Collection Rack Capacity Options:      
25 x 200 mm tubes, 38 x 200 mm tubes, 125 mL or 250 mL Boston Round Bottles, Caliper TurboVap™ Evaporation Tubes (50 and 200 mL, Labconco RapidVap Evaporation Vessels (100 mL flat, 450 mL flat or with stem), 125 mL and 250 mL flasks for rotary evaporation and other options available upon request.     
UV Detector:      
Wavelengths at 254nm or 280 nm with 40 uL Flow Cell (10 mm path length)     
Software Control:      
Computer control via Ethernet communication and TRILUTION® LC Software     
GPC Clean-up Columns:     
Compatible with various GPC Clean-up columns from low pressure glass to high pressure stainless steel     
Optional GPC System Organizer Dimensions (w x d x h):     
39.2 x 37.9 x 93.7 cm (15.5 x 14.9 x 36.9 in)     
Environmental Conditions:      
For indoor use only     
Altitude: 2000 m     
Temperature: 5ºC - 40ºC     
Air pressure: 75 - 105 kPa     
Pollution degree: 1 or 2, in accordance with IEC 66     
Humidity: Maximum relative humidity 80% for temperatures up to 31º C, decreasing linearly to 50% relative humidity at 40ºC     
Manufacturing Standards:      
Meets applicable safety and EMC certification standards; UL and CE certified     
Fuse:     
5 x 20 mm “T” type 2.50A     
One for 100 - 120V; two for 220 - 240V     
Power Requirement:      
Frequency: 50 - 60 Hz     
Voltage: 100 - 240V (universal input)     
Current rating: 2.0A for 100 - 120V or 1.0A for 220 - 240V     
Dimensions (w x d x h):      
59.7 x 54.1 x 57.1 cm (23.5 x 21.3 x 22.5 in)

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com