AMETEK Brookfield - General Purpose Oil Fluids
Manufactured by AMETEK Brookfield
No Documents
General Purpose Oil Fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.
General Purpose Oil Fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.
Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers
Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers
Active Questions & AnswersAsk a Question
There are no current Discussions
Analytical Reagent Service ProvidersView All (3)
Documents & Manuals
There are no Documents or Manuals available.
Features of General Purpose Oil Fluids
- Accuracy: +/-1% of viscosity value * Appropriate for use at shear rates greater than 500 sec-1 * Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP * Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes
General Specifications
There are no General Specifications available.