Leica Microsystems - DFC365 FX
Monochrome Digital Camera for Ultra-fast Live Cell Imaging and Superb Fluorescence Documentation
The new Leica DFC365 FX 1.4 mp monochrome digital camera combines brilliant imaging with very high temporal resolution (up to 21 fps full frame). With state-of-the-art CCD technology, the camera offers a dual imaging mode with NIR (near infra red) capability for enhanced quantum efficiency between 700-1000 nm wavelength.
The high-sensitivity sensor and active-regulated Peltier cooling provide an excellent signal to noise ratio - making this camera ideal for demanding fluorescence applications such as Structured Illumination, TIRF and FRET experiments.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of DFC365 FX
Extremely high frame rates Extremely high frame rates: with overlapping mode, the 2/3" Progressive Scan CCD sensor reads out imaging data while the next exposure is taken.
Optional NIR (near infra red) mode This optional imaging mode provides significant enhanced quantum efficiency and makes this camera ideally suited to monitor CY5 and Cy7 fluorescent dyes.
Ultra-fast read out of definable areas Partial scan mode allows the ultra-fast read out of definable areas at full resolution. Can be combined with overlapping mode and binning.
Brilliant image quality In addition to high-speed image acquisition with either 40 or 20 MHz, the additional clocking rate of 1.6 MHz enables superb fluorescence documentation.
Fast and reliable data transfer With FireWire IEEE1394 b interface for fast and reliable data transfer.
General Specifications
Depth | 132 mm |
Height | 71 mm |
Width | 74 mm |
Power Requirements | 12 V via FireWire cable |
Peak Power | 6 W |
Weight | 572 g |
Microscope Type | Fluorescence |
Additional Specifications
Sensor
CCD sensor:
Sony ICX285, EXview HAD CCD technology, 2/3“ interline transfer progressive scan CCD
Number of pixels:
1392 x 1040
Pixel size:
6.45 Μm × 6.45 Μm
Sensitive surface:
9.00 mm × 6.70 mm
Full well capacity:
18.000 electrons typical
Exposure time:
7 Μseconds – 10 minutes *
Cooling:
One-stage Peltier cooling
Dark noise:
6 electrons typical (1.6 MHz, 12 bit)
Dark current:
69 dB typical (1.6 MHz)
Operating modes:
Standard mode and NIR mode
A/D converter:
14 bit
Bit depth:
8 bit/12 bit
Partial scan:
Freely definable ROI (region of interest), combination with binning possible
Analog gain:
1× – 10×
Software
Supported operating systems:
Windows 7, Windows XP, Vista (32 and 64 bit)
PC Software:
DFC Twain, Leica LAS, Leica LAS AF, MetaMorph (NX)®
Interfaces
C-mount:
0.7 x
Data:
IEEE 1394b FireWire 9-pin single cable
Miscellaneous
Operating temperature range:
+5°C to +50°C
Air humidity:
max 80%, non condensing