Sensidyne - Gilian 3500
With the 3500 there is less risk of lost samples due to battery failure. Both models incorporate a nickel-metal hydride...
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of Gilian 3500
Power equals higher flow rates and higher back-pressure capabilities.
Gilian 3500 provideS automatic constant flow from 700 cc/min to 3500 cc/min and 800 cc/min to 5000 cc/min. When used with a low flow module, they also handle low flows from 20 to 750 cc/min and 20 to 800 cc/min under constant pressure control, such as required for multi-flow sorbent sampling. These pumps offer significantly higher back-pressure capabilities than competitive pumps thanks to a more advanced pneumatic design and a more powerful power source. As a result, dense particulate buildup on the filter, such as with dusty environments is far less likely to trigger premature pump shutdown and an incomplete sample.
the 3500 has an intuitive automatic restart feature that will attempt to save a sample should a fault occur. If the filter becomes clogged or tubing pinches not allowing air to pass, the pump will shut down and attempt to restart every 3 minutes for up to 30 minutes.
General Specifications
There are no General Specifications available.
Additional Specifications
Flow Rate, Max
3.5 Liters Per Minute
Flow Rate, with Low Flow Module
20 cc/min - 750 cc/min
Flow Rate, Standard
700 cc/min - 3500 cc/min
Flow Compensation
1000 cc/min 30" H20 back-pressure (7.5 kPa)
2000 cc/min 30" H20 back-pressure (7.5 kPa)
3000 cc/min 20" H20 back-pressure (5.0 kPa)
4000 cc/min -
5000 cc/min -
Constant Flow Control
Better than ± 3% of set flow
(after calibration) between 1-3 LPM;
± 5% above 3 LPM and below 1LPM
Programmable
No
30-Day Calibration
Yes
EN 1232 Compliant
No
Live Flow Display
Yes
Charging Time
Under 5 Hours
Memory-Free Battery
Yes, NiMH
Four-Button User Interface
Yes, with lock-out feature
Run Time
8 hour minimum
Flow Fault
±5% set flow, fault icon appears; if fault exceeds 30 seconds pump shuts down. Pump will attempt restart every 3 minutes for up to 30 minutes.
LCD Display
Yes; Flow Rate, Total Sample Time, Total Volume Sampled, Charge Status.
Hazardous Approval Ratings
UL: Class I, Division I, Goups A, B, C & D;
Class II, Groups E, F & G
Class III, Temp Code T3C
cUL: Class I, Division I, Groups C &D
Class II, Groups E, F, G
Class III, Temp Code T3C
CE: Ex II 2 G, Eex ib IIB T4