METTLER TOLEDO - XPE Analytical Balances
Reliable Results for Years to Come
Achieving reliable analytical results is dependent on the accuracy of the initial sample. Any error in sample preparation will be simply perpetuated, or even magnified, in downstream processing. With up to 60% of laboratory time spent preparing samples, you need weighing solutions that ensure you get accurate results first time to avoid out-of specification errors and costly reworking.
Whether you want to weigh several kilograms or just a few milligrams, XPE weighing and dosing solutions offer you outstanding weighing performance and innovative technologies to help make your daily tasks easier, error-free and compliant.
Active Questions & AnswersAsk a Question
Model is XP26 (X26T)
Recent Questions & Answers
Updated byGLR
Balances Service ProvidersView All (24)
Documents & Manuals
There are no Documents or Manuals available.
Features of XPE Analytical Balances
Unique performance StaticDetect™ and static elimination technology coupled with an improved SmartGrid weighing pan give you trustable, highly repeatable results. The innovative StatusLight™ balance ready indicator and easy routine testing with the TestManager™ boost your quality management and ease of compliance.
Easy Compliance The StatusLight built into the terminal uses color to indicate intuitively the status of the balance: Green means ready, yellow is a warning, and errors are shown with red. The StatusLight clearly communicates if the balance is ready for you to start your weighing task.
Minimized Static Charges Our unique StaticDetect technology detects electrostatically charged samples or containers. There is a warning if the weighing error exceeds a user-defined limit; antistatic measures can then be employed. For highest process security you can impose a block on release of the weighing result.
Automatic Data Handling METTLER TOLEDO’s LabX® software provides flexible SOP user guidance on the balance touchscreen. With automatic data handling, calculations and reports, balances powered by LabX easily fulfill the highest process security and traceability requirements and support your moves towards a paperless lab.
Reliable Results Excellence XPE Analytical Balances combine patented METTLER TOLEDO weighing technologies with decades of weighing expertise to ensure you get the best weighing results available on the market — quickly and reliably!
Touchless Operation Excellence Analytical Balances have been ergonomically designed to make your life as easy as possible. SmartSens™ sensors allow you to operate your balance with the wave of a hand, making weighing tasks easier and avoiding cross-contamination issues.
Easy Cleaning With the unique SmartGrid and the draft shield that disassembles in seconds, you can always be sure that your weighing area is clean and safe.
RFID Based Operation — Pipette Modern pipettes have an embedded RFID chip that stores a mass of information: pipette ID and volume, last and next calibration dates, and more. With the new integrated RFID reader, you can check all this in seconds and view a full report on the balance terminal – fast and error-free.
FID Based Operation — Titration Enter titration sample information securely at the balance and effortlessly transfer it to the titrator via the titration beaker & SmartSample RFID tag.
Fully Upgradable Automated dosing with Quantos powder and liquid dispensing modules enables you to achieve the highest level of accuracy and safety in sample preparation and can reduce minimum weight by up to 30%
General Specifications
There are no General Specifications available.
Series Modals
METTLER TOLEDO - XPE 105
[+] View Model SpecificationsCalibration | Automatic Internal |
Depth | 487 mm |
Height | 322 mm |
Plate Depth | 78 mm |
Plate Width | 73 mm |
Width | 263 mm |
Balance Type | Analytical Balance |
Capacity | 120 g |
Draft Shield | Included |
Linearity | 0.1 mg (Deviation) |
Minimum Load | 14 mg |
Readability | 0.01 mg |
Repeatability | 0.03 MG (100G) |
Stabilization Time | 1.5 sec |
Additional Model Specifications |
METTLER TOLEDO - XPE 204
[+] View Model SpecificationsCalibration | Automatic Internal |
Depth | 487 mm |
Height | 322 mm |
Plate Depth | 78 mm |
Plate Width | 73 mm |
Width | 263 mm |
Balance Type | Analytical Balance |
Capacity | 220 mg |
Draft Shield | Included |
Linearity | 0.2 mg (Deviation) |
Minimum Load | 80 mg |
Readability | 0.1 mg |
Repeatability | 0.07 MG (200G) |
Stabilization Time | 1.5 sec |
Additional Model Specifications |
METTLER TOLEDO - XPE 205
[+] View Model SpecificationsCalibration | Automatic Internal |
Depth | 487 mm |
Height | 322 mm |
Plate Depth | 78 mm |
Plate Width | 73 mm |
Width | 263 mm |
Balance Type | Analytical Balance |
Capacity | 220 g |
Draft Shield | Included |
Linearity | 0.1 mg (Deviation) |
Minimum Load | 14 mg |
Readability | 0.01 mg |
Repeatability | 0.03 MG (200G) |
Stabilization Time | 2.5 sec |
Additional Model Specifications |
METTLER TOLEDO - XPE 205DR
[+] View Model SpecificationsCalibration | Automatic Internal |
Depth | 487 mm |
Height | 322 mm |
Plate Depth | 78 mm |
Plate Width | 73 mm |
Width | 263 mm |
Balance Type | Analytical Balance |
Capacity | 220 g |
Draft Shield | Included |
Linearity | 0.15 mg (Deviation) |
Minimum Load | 14 mg |
Readability | 0.1 mg |
Repeatability | 0.06 MG (200G) |
Stabilization Time | 1.5 sec |
Additional Model Specifications |
METTLER TOLEDO - XPE 504
[+] View Model SpecificationsCalibration | Automatic Internal |
Depth | 487 mm |
Height | 322 mm |
Plate Depth | 78 mm |
Plate Width | 73 mm |
Width | 263 mm |
Balance Type | Analytical Balance |
Capacity | 520 mg |
Draft Shield | Included |
Linearity | 0.4 mg (Deviation) |
Minimum Load | 80 mg |
Readability | 0.1 mg |
Repeatability | 0.12 MG (500G) |
Stabilization Time | 1.5 sec |
Additional Model Specifications |