PHCBi - MCO-15AC
No Documents
164 Liters cell culture CO2 incubator
Active Questions & AnswersAsk a Question
Sanyo MCO 15AC door heater problem
Serial no. 50404955
CO2 Incubator Service ProvidersView All (28)
Documents & Manuals
There are no Documents or Manuals available.
Features of MCO-15AC
- Accurate temperature and CO2 control & recovery characteristics
- Space saving
- Easy installation
- Basic entry-level model
General Specifications
| CO2 Incubator Type | Direct Heat |
| Depth | 685 mm |
| Temperature Uniformity | 0.2 °C |
| Height | 900 mm |
| Internal Depth | 505 mm |
| Internal Height | 665 mm |
| Width | 620 mm |
| Internal Width | 490 mm |
| Chamber Volume | 164 L |
| CO2 Range | 0 to 20 % |
| Weight | 78 kg |
| Maximum Shelf Load | 10 kg |
| Shelf Dimensions | 3, max 15 |
| Incubator Orientation | Benchtop |
Additional Specifications
Exterior finish:
Baked-on acrylic finish on galvanized steel
Interior finish:
Copper-enriched stainless steel with round corners
Outer doors:
Baked-on acrylic finish on galvanized steel with door heater
Inner doors:
1, Tempered glass
Shelves:
3, max 15
Access ports:
1, backside Ø 30 mm
Cabinet Insulation:
Rigid foam polyurethane
Temperature controller:
Microprocessor PID thermistor sensor
Temperature range:
+5°C above AT to 50°C (in a 5°C to 35°C AT)
Temperature uniformity:
+/- 0,2°C*
Temperature controllability:
+/- 0,1°C*
CO2 control system:
On-off control
CO2 controllability:
+/- 0,15%*
CO2 sensor:
TC sensor (Direct chamber detection)
Humidification method:
Natrual evaporation with humidifying pan
Relative humidity:
95 +/- 5% RH (AT 20°C, 60% RH)
Interior surface:
Standard InCu saFe® Copper Enriched Stainless Steel
Hi/low temperature alarm:
yes
C02 level alarm:
yes
Door failure alarm:
yes
Independent overheat protection:
yes
Remote alarm contact:
30V DC, 2A allowable