ATAS GL - LD239

Manufactured by  ATAS GL
Follow this Equipment

An electronic leak detector is indispensable for finding small leaks around fittings or hot inlets on which a liquid...

An electronic leak detector is indispensable for finding small leaks around fittings or hot inlets on which a liquid cannot be used. Leak check solutions may contain material that can leak into the gas-supply lines or columns and cause ghost peaks or other contamination.   
The LD239 leak detector uses a small pump to pull air from the probe through a thermal-conductivity cell. The presence of carrier gas or hydrogen changes the thermal conductivity and causes a change in the detector´s readout compared to a reference air flow.
Active Questions & AnswersAsk a Question

There are no current Discussions

Leak Detectors Service ProvidersView All (5)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of LD239
  • Super Compact and Light (only 95 g).   * LCD and LED Displays.   * Highly Sensitive - 0.0005 ml/min (He).   * USB Port Rechargeable.   * MEMS technology.
General Specifications
Depth 19.5 mm
Height111 mm
Width 50 mm
Weight95 g
Additional Specifications

Detection: Thermal conductivity      
Target gases: Helium, Hydrogen, CO2, Argon, Neon and other non-corrosive gases.      
Sensitivity: Standard range - minimum 0.005 ml/min (He). High range - minimum 0.0005 ml/min (He)   
Settings: Sensitivity Range: (Standard/High), Buzzer: ON/OFF, LED Display: ON/OFF LCD Backlight: ON/OFF, Auto power shutdown.   
Battery: Rechargeable Lithium ion (up to 5 hours continuous use). Battery is rechargeable through USB port (2.5 hours for a full recharge).

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com