Thermo Scientific - Barnstead GenPure xCAD Plus
Manufactured by Thermo Scientific
Thermo Scientific* Barnstead GenPure xCAD, the extended Control and Dispenser unit, offers an extremely compact...
Thermo Scientific* Barnstead GenPure xCAD, the extended Control and Dispenser unit, offers an extremely compact footprint that increases elbow-room on the lab bench.
The Barnstead GenPure xCAD delivers ultrapure 18.2MW.cm water with consistent quality for the most demanding and sensitive applications. The xCAD remote dispenser provides flexibility and control.
All GenPure* systems exceed international standards ASTM Type I, ISO 3696Grade 1, ASTM D1193 and CLSI-CLRW.
The Barnstead GenPure xCAD delivers ultrapure 18.2MW.cm water with consistent quality for the most demanding and sensitive applications. The xCAD remote dispenser provides flexibility and control.
All GenPure* systems exceed international standards ASTM Type I, ISO 3696Grade 1, ASTM D1193 and CLSI-CLRW.
Active Questions & AnswersAsk a Question
There are no current Discussions
Water Purification Service ProvidersView All (6)
Documents & ManualsView All Documents
Features of Barnstead GenPure xCAD Plus
Integrated feed water monitoring
- Additional measuring cell monitors feed water conductivity
- If the quality of the feed water drops below the set value, a fault message is immediately displayed
Online TOC measurement with UV intensity monitoring
- Real-time TOC monitoring for continual measurement of organic substances present in the water
- Continuous monitoring of UV intensity removes the risk of false TOC values due to diminished UV intensity
- Fault message alerts user when the UV lamp intensity is no longer sufficient for accurate TOC measurements
UV Photo-oxidation 185/254 nm
- High performance UV assembly reliably reduces the content of microorganisms and their metabolites
Ready-to-use
- Feed water pressure switch, wall bracket, UV lamp, ultrapure cartridge, sterile filter, all included in one part number
Measurement of conductivity/resistivity
- Conductivity cells are carefully calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01 cm-1
- Temperature measurements are made by a platinum chip sensor with± 0.1°C accuracy
Quick-connect cartridge replacement
- Aquastop quick-connect capability enables cartridge replacement within seconds even mid-operation
Exact dosing
- Electronic dosing for fully automatic volume control of 0.01-65 L with < 0.5% accuracy
GLP-compliant documentation
- Real-time clock and code-protected operating system prevents unauthorized changes to system settings
- RS-232 interface with adjustable send - interval for safe data transfer of all measured data, faults, date and time to a PC computer or log printer
- Digital microprocessor control automatically monitors and stores faults from the last four weeks
- USP-compliant conductivity measurement with temperature compensation can be switched on or off
General Specifications
There are no General Specifications available.
Additional Specifications
Operating pressure, min/max: 2 to 6 bar
Conductivity: 0.055µS/cm
Resistance at 25°C: 18.2MWxcm
Bacterial content (CFU/mL): 0.2µM/mL: <1
Temperature min./max.: 2° - 35°C
Series Modals
Thermo Scientific - Barnstead GenPure xCAD Plus
[+] View Model SpecificationsDepth | 372 mm |
Flow Rate | 2 L/min |
Height | 615 mm |
Width | 330 mm |
ASTM Type | ASTM Type I |
TOC | 10 ppb (max) |
Additional Model Specifications | Operating pressure, min/max: 2 to 6 bar Conductivity: 0.055µS/cm Resistance at 25°C: 18.2MWxcm Bacterial content (CFU/mL): 0.2µM/mL: <1 Temperature min./max.: 2° - 35°C |
Thermo Scientific - Barnstead GenPure xCAD Plus UV
[+] View Model SpecificationsDepth | 330 mm |
Flow Rate | 2 L/min |
Height | 603 mm |
Width | 372 mm |
ASTM Type | ASTM Type I |
TOC | 5 ppb (max) |
Additional Model Specifications | Operating pressure, min/max: 2 to 6 bar Conductivity: 0.055µS/cm Resistance at 25°C: 18.2MWxcm Bacterial content (CFU/mL): 0.2µM/mL: <1 Temperature min./max.: 2° - 35°C |