Shimadzu - SolidSpec - 3700/3700DUV

Manufactured by  Shimadzu
Follow this Equipment

Three Detector Systems with Large Sample Compartment

Shimadzu’s SolidSpec-3700/3700DUV spectrophotometers are top-of-the-line systems offering high sensitivity, deep UV measurement and large sample compartments. The SolidSpec-3700 and 3700DUV respond to the following requirements in the optical, semiconductor and FPD markets.
Active Questions & AnswersAsk a Question

There are no current Discussions

UV/VIS Spectrophotometers Service ProvidersView All (32)

Request Support
Features of SolidSpec - 3700/3700DUV

High Sensitivity  The SolidSpec-3700 and 3700DUV are the FIRST UV-VIS-NIR SPECTROPHOTOMETERS with THREE DETECTORS: a photomultiplier tube (PMT) detector for the ultraviolet and visible region; InGaAs and PbS detectors for the near-infrared region. The use of the InGaAs and PbS detectors makes the sensitivity in the near-infrared region significantly high. 

Deep UV Measurement  The SolidSpec-3700DUV has the capability to measure the deep ultraviolet region down to 165nm(note) (or to 175nm with an integrating sphere) by purging both the optical and the sample compartment with nitrogen gas. Note) 165nm is the minimum wavelength for SolidSpec-3700DUV with its optical attachment, Direct Detection Unit DDU-DUV. 

Large Sample Compartment  The large sample compartment (900W x 700D x 350H mm) allows large samples to be measured without destroying the sample. The vertical optical path makes it possible to measure large samples while keeping them horizontal. The whole sample area of 12 inches or 310 x 310 mm samples is measurable by mounting the automatic X-Y stage (option).

General Specifications

There are no General Specifications available.

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com