NuAire - DHD AutoFlow 5510
Manufactured by NuAire
DHD AutoFlow 5510 (NU-5510) CO2 Direct Heat Incubator with Decontamination Cycle
The Autoflow 5510 (NU-5510) sterilization cycle CO2 Incubator control of airborne contaminants via continuous HEPA filtration. Dual decontamination cycles, at 95°C wet decontamination and a 145°C dry sterilization cycle, are exceptionally useful for cell line changes and /or when working with hazardous agents.
Active Questions & AnswersAsk a Question
2Replies
CO2 sensor won't calibrate
Recent Questions & Answers
Updated byvanzigler
CO2 Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of DHD AutoFlow 5510
- A 99.99% efficient HEPA filter maintains Constant Contamination Control (C3) in the growth chamber
- Dual Temperature sensor probes mounted just under the inflow to the HEPA filter controlling the chamber environment
- The interior corners of the growth chamber are coved for ease of cleaning and to prevent contaminants from becoming trapped.
General Specifications
| CO2 Incubator Type | Direct Heat |
| Depth | 26.5 in |
| Temperature Uniformity | 0.3 °C |
| Height | 39.5 in |
| Internal Depth | 21 in |
| Internal Height | 25.5 in |
| Width | 25.5 in |
| Internal Width | 21.5 in |
| Chamber Volume | 6.65 cu. ft. |
| CO2 Sensor | Infrared (IR) |
| CO2 Range | 0.1 to 20 % |
| Temperature Accuracy | 0.1 °C |
| Incubator Orientation | Benchtop |
Additional Specifications
Temperature Sensitivity: ±0.125° C
Temperature Recovery: 0.3° C/min.
Temperature Display Resolution: 0.1° C
CO² Recovery: Up to 5% ± 0.2% in 4 minutes
CO² Display Resolution: 0.1%
Gas Control System: Microprocessor
Temperature Control System: Direct heat with sterilization cycle