LabPlant - SD-06A

Manufactured by  LabPlant
Follow this Equipment

The LabPlant SD-06 Laboratory Scale Spray Dryer

The LabPlant SD-06 Laboratory Scale Spray Dryer is the result of 30 years of continuous development in the field of laboratory scale spray drying systems.     
     
The unit is self contained and supplied complete and ready for immediate operation. All major components are housed within a stainless steel cabinet and the unit can be used on a bench top or with an optional stainless steel stand.     
     
The SD-06 only requires connection to a 13 amp, 220/240 V, 50 Hz power supply (Other Power Requirements Available) and provision for exhausting the evaporated moisture to atmosphere or to an existing extraction system.
Active Questions & AnswersAsk a Question

There are no current Discussions

Need Equipment Support?

Request Support
Features

There are no Features available.

General Specifications

There are no General Specifications available.

Additional Specifications

Suitability:    
Aqueous & Solvent    
Type:    
2 way spray type nozzle    
Drying capacity:    
Maximum approximately 1000 -1500ml/h    
Temperature range accuracy:    
50ºC ~ 250ºC(Temperature at inlet) ±1ºC    
Dried air volume range:    
10 ~ 30m³/hr    
Spray air pressure range:    
2 - 2.8 Bar    
Feed pump volume range:    
60 ~ 2000ml/h    
Inlet temperature setting:    
Touch screen controlled    
Outlet temperature display:    
Digital    
Dried air flow rate setting:    
Touch screen controlled   
Feed pump flow rate setting:    
Touch screen controlled    
Sprayed air pressure setting:    
2m³/hr @ 2 bar - 1.7m³ @ 4 bar    
Sprayed air line cleaning device:    
Automatic interval timer    
Additional function:    
Pump on/off    
Recorder output terminal:    
RS232 connection   
Heater:    
3kW    
Feed pump:    
Variable speed peristaltic pump    
Spray nozzle:    
0.5mm fitted as standard    
Air pump for spray:    
Incorporated   
Drying chamber:    
Borosilicate glass    
Cyclone:    
Borosilicate glass    
Sample collection bottle:    
Hard glass (500ml as standard)    
Suction blower:    
Touch screen controlled    
Maximum air pressure:    
2.8 Bar    
Exhaust diameter:    
O/D 50mm    
De-blocking interval timer:    
Touch screen controlled @ 1,4 & 9 sec.   
Operational ambient temperature:    
5ºC ~ 35ºC

Series Modals

LabPlant - SD-06A

[+] View Model Specifications

LabPlant - SD-06AG

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com