LabPlant - SD-Basic
A simple and effective laboratory scale spray dryer for product research and development.
The SD-Basic spray dryer is designed to enable initial product trials and evaluation to be carried out quickly and efficiently.
The unit is supplied with a complete glassware set comprising main drying chamber, cyclone, sample collection and waste collection bottles, clamps, seals and all necessary tubing.
Active Questions & AnswersAsk a Question
Replacement Cyclone?
Recent Questions & Answers
Updated byLabWrenchEditor
Need Equipment Support?
Documents & ManualsView All Documents
Features
There are no Features available.
General Specifications
Depth | 500 mm |
Height | 1100 mm |
Width | 500 mm |
Power Requirements | AC 220/240V 50/60Hz 21A |
Weight | 60 kg |
Additional Specifications
Suitability:
Aqueous only
Type:
2 way spray type nozzle
Drying capacity:
Maximum approximately 1000ml/h
Temperature range accuracy:
40ºC ~ 200ºC(Temperature at inlet) ±1ºC
Dried air volume range:
0.2 ~ 0.65m³/min
Spray air pressure range:
49 ~ 245kPa (0.5 ~ 2.5kg/cm2)
Feed pump volume range:
102 ~ 1800ml/h
Inlet temperature setting:
Digital membrane switch
Outlet temperature display:
Digital
Dried air flow rate setting:
N/A
Feed pump flow rate setting:
Variable resistance potentiometer
Sprayed air pressure setting:
N/A
Sprayed air line cleaning device:
Automatic interval timer
Additional function:
Prayed air line valve on/off switch
Recorder output terminal:
N/A
Heater:
3kW
Feed pump:
Variable speed peristaltic pump
Spray nozzle:
0.5mm fitted as standard
Air pump for spray:
Optional
Drying chamber:
Borosilicate glass
Cyclone:
Borosilicate glass
Sample collection bottle:
Hard glass (500ml as standard)
Suction blower:
Fixed @ 70m³/hr
Maximum air pressure:
3.0 Bar
Exhaust diameter:
O/D 50mm
De-blocking interval timer:
Manual
Operational ambient temperature:
5ºC ~ 35ºC