Gonotec - Osmomat 050

Manufactured by  Gonotec
Follow this Equipment

The OSMOMAT 050 was especially developed for use in intensive care units. It is designed to be used on a 24 h/day 7...

The OSMOMAT 050 was especially developed for use in intensive care units. It is designed to be used on a 24 h/day 7 day/week basis and the system is always ready to collect data. The system performs all cleaning and control operations during the stand-by period so that the user can perform a measurement at any time. After performing a measurement, the OSMOMAT 050 is automatically cleaned so the next measurement can be performed as required.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byCina

Osmometers Service ProvidersView All (5)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Osmomat 050
  • high-performance measuring cell  
  • minimum sample volume  
  • simple injection of the sample solution (plasma or serum, whole blood not recommended)  
  • measuring time < 1 minute  
  • automatic zero setting  
  • user selection of the pressure dimension (mm Hg), (cm water column) or (k-Pascal), respectively  
  • display of the first result and storage of a second value serve as a control of the equilibration of the system   
  • automatic rinsing of the measuring cell after each measurement  
  • simple calibration with hydrostatic pressure differential  
  • automatic stand-by function over longer periods of time
General Specifications

There are no General Specifications available.

Additional Specifications

Measurement volume: 100 µL  
Measurement time: 1-3 Minutes, Depending on membrane type  
Measurement format:  99.9 mm Hg; 9.99 k-Pascal  
Reproducibility: 10,000 - 30,000 Dalton  
Recorder Output: 2mV/Digit, ±10%, can be set for recorder compensation with 1 Volt output  
Measurement: Direct pressure measurement via difference in hydrostatic pressure  
Automation:  
1. Stand alone wash of the upper half of the cell is available to prepare the cell  
2. Storage of the results  
3. Storage of all data values over a specified time period after the first measurement

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com